Improvement in the physical and mechanical properties of the cement-based composite with the addition of nanostructured BN–Fe3O4 reinforcement
Open Access
- 29 September 2021
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-13
Abstract
In this work, the performance of modified cement by nanostructures consisting of boron nitride (BN) and iron oxide inorganic nanoparticles (Fe3O4) was analyzed. The mechanical strength, electrical resistivity, and the degree of cement hydration as well as the microstructure were investigated in detail. A hybrid filler boron nitride-iron oxide (BN–F) composed of Fe3O4and BN was successfully synthesized using a chemical reaction. Transmission electron microscope (TEM) results showed proper binding of BN–F nanostructures. Addition of the hybrid nanostructured BN–F5 (containing 0.5 wt.% Fe3O4and 0.5 wt.% BN) into the cement matrix increased the compressive strength and flexural strength by 65%, and 74%, respectively, after 28 days of curing. The improvement in mechanical strength is attributed to the increased surface friction induced by the Fe3O4nanoparticles on the BN surfaces, resulting in increased interaction with the matrix. Microstructural studies, such as scanning electron microscope (SEM), showed the formation of a dense structure due to improved dispersion in the cement environment and hybrid performance in preventing crack growth, which is the main reason for the overall improvement in mechanical properties. The concrete resistance gauge (RCON, Giatec) and simultaneous thermal analysis (STA) tests revealed a significant increase in thermal and electrical conductivity in composite reinforced with nanostructured BN–F.Keywords
This publication has 71 references indexed in Scilit:
- The effect of graphene dispersion on the mechanical properties of graphene/epoxy compositesCarbon, 2013
- Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubesComposites Science and Technology, 2011
- In situ preparation of functionalized graphene oxide/epoxy nanocomposites with effective reinforcementsJournal of Materials Chemistry, 2011
- “White Graphenes”: Boron Nitride Nanoribbons via Boron Nitride Nanotube UnwrappingNano Letters, 2010
- Frictional Characteristics of Atomically Thin SheetsScience, 2010
- Large‐Scale Fabrication of Boron Nitride Nanosheets and Their Utilization in Polymeric Composites with Improved Thermal and Mechanical PropertiesAdvanced Materials, 2009
- Energy, the global challenge, and materialsMaterials Today, 2008
- Crack interaction with microstructureMaterials Today, 2007
- Effect of orientation on the in vitro fracture toughness of dentin: the role of toughening mechanismsBiomaterials, 2003
- Organically Modified Layered Silicates as Reinforcing Fillers for Natural RubberChemistry of Materials, 2002