Near time-optimal transient response in DC-DC buck converters taking into account the inductor current limit
Authors:
- 1 September 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23293721,p. 3328-3335
Abstract
This paper analyzes the general problem of inductor current limitation in the time-optimal load transient response of a DC-DC buck converter. The concept of current-limited, time-optimal control (CL-TOC) is introduced and compared to the previously reported unconstrained time-optimal solutions. A fundamental tradeoff between maximum allowed current overshoot and voltage recovery time is recognized, and a set of design equations is developed which provide the engineer with the necessary analytical tools for the controller design. Furthermore, the minimum number of switching actions required to handle a generic current-limited TOC is determined, leading to the formulation of a minimum-switch CL-TOC concept. Two distinct approaches for minimum-switch digital CL-TOC are then introduced. The first method, which is an extension of a charge-balance approach, has the advantage of achieving the time-optimal switching sequence without the need for a prior knowledge of the output filter LC parameters. The second approach implements a near CL-TOC employing the switching surface concept and defining the current limitation in the state-space. Simulation and experimental results are provided to demonstrate the effectiveness of the approaches.Keywords
This publication has 14 references indexed in Scilit:
- Constrained Optimal Control of the Step-Down DC–DC ConverterIEEE Transactions on Power Electronics, 2008
- Time optimal, parameters-insensitive digital controller for VRM applications with Adaptive Voltage Positioning2008
- Proximate Time-Optimal Digital Control for Synchronous Buck DC–DC ConvertersIEEE Transactions on Power Electronics, 2008
- Time optimal, parameters-insensitive digital controller for DC-DC buck converters2008
- Continuous-Time Digital Controller for High-Frequency DC-DC ConvertersIEEE Transactions on Power Electronics, 2008
- Self-Tuning Digital Current Estimator for Low-Power Switching Converters2008
- A Comparative Study of Boundary Control With First- and Second-Order Switching Surfaces for Buck Converters Operating in DCMIEEE Transactions on Power Electronics, 2007
- Online Health Monitoring in Digitally Controlled Power Converters2007
- Trajectory Paths for Dc - Dc Converters and Limits to Performance2006
- Derivation of a Second-Order Switching Surface in the Boundary Control of Buck ConvertersIEEE Power Electronics Letters, 2004