Thermal Stress Analysis and Control Method for Surface Acoustic Wave Atomizer
Open Access
Abstract
To prevent the potential failure of the surface acoustic wave (SAW) atomizer caused by the concentration of thermal stresses, this study investigates the thermal elevation process inherent to the operation of the surface wave atomizer. Subsequently, a method for temperature regulation is proposed. By collecting the temperature rise data of SAW atomizers with water, olive oil, and glycerol at 5/6/7 Watts (W) of power, the temperature curves of the atomizer surface under different conditions are obtained, and the stress changes in the working process are simulated additionally. The results indicate that although the stress generated by surface acoustic wave atomizers varies for different media, there is always a problem of rapid heating during the initial working stage in all cases. To address the above issues, this study analyzed the time when the maximum stress occurred and proposed control methods based on experimental data. The simulation results show that by controlling the driving power within 4 s after the start of atomization, the problem of excessive stress during the heating stage can be avoided. Finally, the feasibility of the control method was verified through a simple power control method (limiting the driving power to 3 W in the first 2 s), proving that this method can effectively reduce the thermal stress during the working process of the atomizer and prevent the atomizer from cracking.Keywords
Funding Information
- National Key Research and Development Program of China (2020YFB1506205, U1837209, 11774381, 52072184)
- National Natural Science Foundation of China (2020YFB1506205, U1837209, 11774381, 52072184)
This publication has 13 references indexed in Scilit:
- Design of Electronic Cigarette System Based on Ultrasonic Atomization Technology2019
- Acoustothermal heating in surface acoustic wave driven microchannel flowPhysics of Fluids, 2019
- Surface acoustic wave nebulization device with dual interdigitated transducers improves SAWN‐MS performanceJournal of Mass Spectrometry, 2016
- Screen-printed digital microfluidics combined with surface acoustic wave nebulization for hydrogen-deuterium exchange measurementsJournal of Chromatography A, 2016
- Rayleigh surface acoustic wave as an efficient heating system for biological reactions: investigation of microdroplet temperature uniformityIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2015
- Paper-Based Microfluidic Surface Acoustic Wave Sample Delivery and Ionization Source for Rapid and Sensitive Ambient Mass SpectrometryAnalytical Chemistry, 2011
- Temperature stable LiNbO3 surface acoustic wave device with diode sputtered amorphous TeO2 over-layerApplied Physics Letters, 2005
- Small‐scale free surface flows with breakup: Drop formation and emerging applicationsAIChE Journal, 2002
- Surface acoustic wave atomizerSensors and Actuators A: Physical, 1995
- Viscosity of Glycerol and Its Aqueous SolutionsIndustrial & Engineering Chemistry, 1951