Pulp Fiber-Reinforced Polylactic Acid (PLA) Nanocomposites Prepared by In Situ Extrusion Fibrillation
- 16 October 2026
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
Abstract
Pulp fiber-reinforced polymer nanocomposites have received considerable R&D interest, with a notable challenge in achieving good nanofiber dispersion. One particularly successful approach is through the in situ fibrillation of the pulp fibers into nanofibers in the presence of polymers during extrusion compounding. The extrusion fibrillation of bleached/unbleached pulp fibers and old corrugated container was investigated with polylactic acid (PLA) for improving fiber dispersion. Extrusion fibrillation generated both fibrillated nanofibers and unfibrillated pulp fibers, which were well dispersed in the PLA matrix. PLA’s crystallinity increased as fiber loading increased, attributable to the nucleating effect of cellulose. Heat deflection temperature increased from 53 °C to 57 °C with fiber presence at high loading. Higher fiber loading also increased the viscosity of composite melts because of increased fiber−fiber and fiber−polymer interactions. The biocomposites formed were found to have improved tensile strength (∼75 MPa) and stiffness (∼5.5 GPa) by 15% and 53%, respectively, at a 30 wt. % fiber loading relative to the neat PLA polymer, without any loss in impact strength. The improvement in composites’ mechanical properties comes from well-dispersed nanofibers, increased interfacial interaction, and higher polymer matrix crystallinity. This research shows the potential of extrusion fibrillation for recycling old corrugated containers as a reinforcing material in PLA composites.Keywords
Funding Information
- North Carolina State University
- U.S. Department of Energy (4000174848)
- U.S. Department of Energy (DEAC05-00OR22725)
This publication has 46 references indexed in Scilit:
- Process stability optimization of the twin-screw extrusion adapted for concentrated cellulose fibrillationJournal of Materials Science, 2024
- Cellulose nanofibril production by the combined use of four mechanical fibrillation processes with different destructuration effectsCellulose, 2023
- Drying and redispersion of plant cellulose nanofibers for industrial applications: a reviewCellulose, 2020
- Conversion Economics of Forest Biomaterials: Risk and Financial Analysis of CNC ManufacturingBiofuels, Bioproducts and Biorefining, 2017
- Development of continuous process enabling nanofibrillation of pulp and melt compoundingCellulose, 2013
- Kinetics of Hydrolytic Degradation of PLAJournal of Polymers and the Environment, 2012
- Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strengthCellulose, 2010
- Preparation of cellulose nanofibers with hydrophobic surface characteristicsCellulose, 2009
- The effects of transcrystalline interphase in advanced polymer compositesPolymer Engineering & Science, 1992
- Effect of compounding on the properties of short fiber reinforced injection moldable thermoplastic compositesPolymer Composites, 1985