Abstract
Fracture toughness and its deformed structures were investigated on a Mg–3Al–1Zn (AZ31) alloy processed by direct extrusion. The average grain sizes of the alloy after extrusion at temperatures of 473 and 573 K were 4.0 and 14.5 μm, respectively (i.e., fine-grained and coarse-grained alloys). The plane-strain fracture toughness,KIC, as determined by stretched zone analysis in fine-grained and coarse-grained alloys was estimated to be 24.9 and 22.7 MPam1/2, respectively. Microstructural observations of the fine-grained alloy after fracture toughness testing showed that non-basal slip and grain-boundary sliding was activated even at room temperature. In addition, the {10-12} deformation twins were observed despite the fine-grained structures. However, the fraction of deformation twins was reduced with grain refinement, which related to the enhancement of fracture toughness with grain refinement.

This publication has 49 references indexed in Scilit: