Effect of Fiber Loading on the Mechanical Properties of Millet Husk Filled High Density Polyethylene Composites
- 6 June 2014
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 564, 350-354
Abstract
The aim of this study is to determine the effect of fiber loading on the mechanical properties of millet husk (MH) filled high density polyethylene (HDPE) thermoplastic composites. Three different fiber sizes; 250 μm, 500 μm and 750 μm were pulverized and the fiber loading was 10 %, 20 %, 30 % and 40% by weight. The MH-HDPE composites were prepared by application of internal mixer, accompanied by compression molding process. Tensile properties were tested using universal testing machine (UTM). The tensile strength increase from 0 % to 10 % by weight fiber loadings. But this strength decrease as the fiber loading increase, while the modulus increase as the loadings increases. At 30 % fiber loadings, the strength of the composites decrease for high fiber sizes of 500 μm and 750 μm and increases for small fiber sizes of 250 μm for both the composites strength and modulus . This is presume the maximum loading for MHHDPE composites.Keywords
This publication has 8 references indexed in Scilit:
- Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane compositesMaterials & Design (1980-2015), 2012
- Mechanical Properties of Sugar Palm Fibre Reinforced High Impact Polystyrene CompositesProcedia Chemistry, 2012
- Mechanical properties of natural fibre reinforced polyester composites: Jowar, sisal and bambooMaterials & Design (1980-2015), 2011
- Barley husk and coconut shell reinforced polypropylene composites: The effect of fibre physical, chemical and surface propertiesComposites Science and Technology, 2010
- Effect of fiber surface treatment and fiber loading on the properties of bagasse fiber–reinforced unsaturated polyester compositesComposites Science and Technology, 2008
- Study of the Mechanical and Morphological Properties of Plasticized PVC Composites Containing Rice Husk FillersJournal of Reinforced Plastics and Composites, 2007
- Enhancement of Processability of Rice Husk Filled High-density Polyethylene Composite ProfilesJournal of Thermoplastic Composite Materials, 2005
- A knowledge-based system for materials selection in mechanical engineering designMaterials & Design (1980-2015), 2001