Cold-Start Hydrocarbon Speciation and Trap Materials for Gasoline Engines
Authors:
- 3 April 2018
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Efficient hydrocarbon (HC) trap materials have been developed to trap the major emitting HC compounds from gasoline direct injection engines. Online FTIR measurements on different test cycles and catalytic systems showed that AHC, C5 compounds, and CH4 were the most emitted species at cold-start phase (up to 100 sec). Making AHC and C5 as targets for improving the HC light-off, lab scale reactor set-up was established with toluene and iso-pentane feed pumping system along with propane-propene mixture. TGA screening experiments conducted with ex-situ toluene adsorption and the results revealed that BEA type materials have moderate to higher HC trapping temperature and HC storage capacity. In the present investigation, BEA-HS exhibited outstanding stability and trapping ability even after 850 °C hydrothermal aging. PGM and TM based BEA materials were evaluated for HC-TPD experiments with TWC gas composition. Interestingly, adsorption properties of the samples at various aging temperatures are well correlated with pore size and structure. Functionalized micro-pore materials with transition based metals showed substantial improvement on toluene desorption temperature. Based on these studies and the test results, advanced HC trap catalysts have been designed which demonstrated potential advantage over conventional TWC.Keywords
This publication has 10 references indexed in Scilit:
- HC Traps for Gasoline and Ethanol ApplicationsSAE International Journal of Fuels and Lubricants, 2013
- Promising zeolite-type hydrocarbon trap catalyst by a knowledge-based combinatorial approachMicroporous and Mesoporous Materials, 2009
- A comparative study of zeolites SSZ-33 and MCM-68 for hydrocarbon trap applicationsMicroporous and Mesoporous Materials, 2006
- Automotive fuels and internal combustion engines: a chemical perspectiveChemical Society Reviews, 2006
- Methane Emissions from VehiclesEnvironmental Science & Technology, 2004
- One-dimensional zeolites as hydrocarbon trapsMicroporous and Mesoporous Materials, 2002
- Application Guideline to Define Catalyst Layout for Maximum Catalytic EfficiencySAE International Journal of Advances and Current Practices in Mobility, 2001
- Analyses of Exhaust Hydrocarbon Compositions and Ozone Forming Potential During Cold StartSAE International Journal of Advances and Current Practices in Mobility, 1996
- Close-coupled Catalytic Converters for Compliance with LEV/ULEV and EG III Legislation - Influence of Support Material, Cell Density and Mass on Emission ResultsSAE International Journal of Advances and Current Practices in Mobility, 1996
- Fuel Structure and the Nature of Engine-Out EmissionsSAE International Journal of Advances and Current Practices in Mobility, 1994