Sintering of screen-printed platinum thick films for electrode applications
Authors:
- 1 April 2001
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 16 (4) , 922-931
Abstract
Pt electrodes with a 6–8-μm thickness were produced on alumina substrates by a double-print Pt screen-printing process that included a sequential heat treatment at 600 °C and 1300 °C. This process improved the final sintered double-print film because the first printed layer acted as a sintering template for the second printed layer. The sintered Pt films have a 95% coverage of the alumina surface, 92% density, 0.73-μm average surface roughness, and 16.10−5 Ω cm resistivity. The sintering behavior of Pt films exhibited three stages of densification: Stage I (T °C < 700 °C), exhibiting neck growth, and Stage II (700 < T °C < 1300 °C), exhibiting grain growth, have activation energies of 64 kJ/mol and 125 kJ/mol, respectively. Stage III exhibits a decrease in shrinkage due to Pt coalescence and island formation. The transition temperature, 700 °C, between Stages I and II corresponds to an anomalous increase in surface roughness and resistivity. The thickness of Pt films was a critical parameter for achieving alumina surface coverage. Uniaxial pressing of dried Pt films increased densification and reduced the surface roughness of double-print Pt films.Keywords
This publication has 21 references indexed in Scilit:
- Piezoelectric Thick-film Materials and SensorsMicroelectronics International, 1995
- Characterisation of sol-gel PZT films on Pt-coated substratesJournal of Micromechanics and Microengineering, 1995
- Glass-substrate interaction in thick film technologyScripta Metallurgica et Materialia, 1994
- A novel torque sensor based on elastic waves generated and detected by piezoelectric thick filmsSensors and Actuators A: Physical, 1994
- Compositional and structural behaviour of screen-printed pzt thick films during rapid sinteringFerroelectrics, 1994
- Ferroelectric thick-films for piezoelectric applicationsFerroelectrics, 1994
- The instability of polycrystalline thin films: Experiment and theoryJournal of Materials Research, 1990
- An Oscillatory Desorption of Hydrogen and Alkali Atoms from α-AluminaJapanese Journal of Applied Physics, 1985
- Thick-film Technology: An Introduction to the MaterialsIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1980
- Introduction to CeramicsJournal of the Electrochemical Society, 1977