Precipitation phenomena in Al-Zn-Mg alloy matrix composites reinforced with B4C particles
Open Access
- 29 August 2017
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 1-11
Abstract
To provide insight into precipitation phenomena in age-hardening Al-Zn-Mg(-Cu) matrix composites, an Al 7075 alloy composite reinforced with B4C particles was selected as a model system. The bulk composites were fabricated via plasma activated sintering and followed by a peak aged (T6) heat treatment. Two types of Al matrix zones were identified in the composite: (1) the regions in the vicinity of the matrix/reinforcement interface, defined as “matrix plastic zone” (MPZ) hereafter, and (2) the regions away from the matrix/reinforcement interface, simply defined as matrix hereafter. The precipitation behavior in the MPZ was characterized and compared to that in the matrix. The MPZ contained a high density of dislocations. The number density of GP zones in the MPZ is lower than that in the matrix while the average size of the GP zones in MPZ is coarser. In addition, semi-coherent platelet η′ precipitates were observed but only in the MPZ. The dislocations and the Al/B4C interfaces provide more heterogeneous nucleation sites for the η′ precipitates in the MPZ. The growth and coarsening of the η′ precipitates caused rapid depletion of Mg and Zn solute atoms in the MPZ.Keywords
This publication has 63 references indexed in Scilit:
- The vacancy–edge dislocation interaction in fcc metals: A comparison between atomic simulations and elasticity theoryActa Materialia, 2006
- Aging response of Al–Zn–Mg–Cu spray formed alloys and their metal matrix compositesMaterials Science and Engineering: A, 2006
- Accelerated aging processes in SiC-7020 aluminium compositeJournal of Materials Processing Technology, 1998
- Fabrication of Al matrix in situ composites via self-propagating synthesisMaterials Science and Engineering: A, 1994
- Dislocation Punching From Ceramic/Metal InterfacesJournal of Engineering Materials and Technology, 1994
- Dynamic deformation behavior of AlZnMgCu alloy matrix composites reinforced with 20 Vol.% SiCActa Metallurgica et Materialia, 1993
- Influence of dislocation density and distribution on the aging behavior of 6061 AlSiCw compositesActa Metallurgica et Materialia, 1990
- Study of formation and reversion of Guinier-Preston zones in Al-4.5 at%Zn-x at%Mg alloys by positronsJournal of Materials Science, 1986
- On the kinetics of the growth of Guinier–Preston zones in Al-Zn-Mg alloysPhysica Status Solidi (a), 1974
- On the kinetics of the growth of Guinier-Preston zones (GPZ) in AlZn(2.5 at%) Mg(X) alloysPhysica Status Solidi (a), 1974