Fracture Load Prediction of Non-Linear Structural Steels through Calibration of the ASED Criterion
Open Access
Abstract
In this work, the application of the Average Strain Energy Density (ASED) criterion for the estimation of failure loads in materials with nonlinear behavior containing U-shaped notches is presented. The ASED criterion was originally defined to predict failure in the presence of notches in materials with linear-elastic behavior. However, most structural materials (e.g., ferritic-pearlitic steels) can develop non-linear behavior (e.g., elastoplastic). In this sense, this work proposes to extend the use of the ASED criterion to materials that exhibit plasticity by a thorough calibration of their characteristic parameters, and the subsequent extrapolation of the liner-elastic formulation of the ASED criterion to non-linear situations. To validate this methodology, a wide range of structural steels (S275JR, S355J2, S460M, and S690Q) were used operating in the ductile-to-brittle transition range, with six different notch radii (0 mm, 0.15 mm, 0.25 mm, 0.50 mm, 1.0 mm, and 2.0 mm). The results obtained demonstrate that the proposed calibration of the ASED criterion allows for accurate predictions of failure loads. Therefore, it is shown that, for the notch radii analyzed in this work and for testing temperatures within the material ductile-to-brittle transition range, it is possible to extrapolate the ASED criterion to obtain estimates of failure loads in materials with U-shaped notches that exhibit ductile behavior.Keywords
Funding Information
- Ministerio de Ciencia e Innovación (Project MAT2014-58443-P)
This publication has 30 references indexed in Scilit:
- Analysis of notch effect in the apparent fracture toughness and the fracture micromechanisms of ferritic–pearlitic steels operating within their lower shelfEngineering Failure Analysis, 2014
- On the notch effect in load bearing capacity, apparent fracture toughness and fracture mechanisms of polymer PMMA, aluminium alloy Al7075-T651 and structural steels S275JR and S355J2Engineering Failure Analysis, 2013
- A review of the volume-based strain energy density approach applied to V-notches and welded structuresTheoretical and Applied Fracture Mechanics, 2009
- The Theory of Critical Distances: Basics2007
- Some Expressions for the Strain Energy in a Finite Volume Surrounding the Root of Blunt V-notchesInternational Journal of Fracture, 2005
- The failure of fibre composites: An overviewThe Journal of Strain Analysis for Engineering Design, 1989
- Strain-energy-density factor applied to mixed mode crack problemsInternational Journal of Fracture, 1974
- On the relationship between critical tensile stress and fracture toughness in mild steelJournal of the Mechanics and Physics of Solids, 1973
- Elastic field equations for blunt cracks with reference to stress corrosion crackingInternational Journal of Fracture, 1967
- Yielding of steel sheets containing slitsJournal of the Mechanics and Physics of Solids, 1960