Effect of Oxygen on the Compatibility of Tantalum and Potassium
Author:
- 1 October 1972
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 28 (10) , 360-367
Abstract
Static capsule tests were used to study the effect of oxygen in each phase on the compatibility of tantalum and potassium at 600, 800, and 1000 C (1112, 1472, and 1832 F). As the oxygen concentration of the potassium was increased, the amounts of tantalum in potassium after test also increased. The results indicate the formation of an unidentified ternary oxide phase (probably at the tantalum-potassium interface) that is either nonadherent or dissolved when the potassium is dissolved for chemical analysis. On the other hand, when the tantalum specimens contained oxygen above a certain threshold concentration that depends on test conditions, potassium penetrated the tantalum, and both intergranular and transgranular attack occurred. The threshold levels for intergranular attack at 600, 800, and 1000 C were determined to be 500, 700, and 1000 ppm of oxygen, respectively. Again the explanation involves the formation of a ternary oxide phase.Keywords
This publication has 5 references indexed in Scilit:
- Effect of Oxygen on Niobium-Sodium CompatibilityCorrosion, 1971
- Penetration of Refractory Metals by Alkali Metals1970
- The corrosion of Ta by Na2O-saturatedliquid NaCorrosion Science, 1970
- The Effect of Oxygen on the Compatibility of Niobium With PotassiumCorrosion, 1969
- Corrosion product of the tantalum-interstitial oxygen-potassium system at 1800 °F (982 °C)Journal of the Less Common Metals, 1968