Aging Properties and Application Performance Evaluation of Butyl Rubber
Open Access
- 16 November 2026
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (11) , 616
Abstract
Butyl rubber cover plates are used in autoclave molding of composites, yet their evolution under high temperature and cyclic thermal stress and the role of geometry remain poorly understood. We investigated butyl rubber thermal aging through air/vacuum, long-term, cyclic thermal-stress, and expired-compound tests, with finite element simulations of flat and trapezoidal structures. Aging at 180 °C is dominated by mild thermal crosslinking rather than thermo-oxidative degradation, with negligible air/vacuum differences, and proceeds in two stages: crosslinking-dominated (0–240 h) followed by crosslinking equilibrium with slight degradation. Cyclic thermal stress accelerates crosslinking via thermo-mechanical coupling, raising crosslink density to about 1.56 times the initial value after 108 cycles, with an average acceleration factor of 2.64 versus static aging. Expired compounds follow the same mechanism, differing only in initial network state and reaction rate. n-order and two-stage kinetic models well describe property evolution (R2 > 0.85, mostly above 0.95). Service verification confirmed prepreg-reinforced cover plates meet acceptance criteria after 65 cycles. Novelty lies in the thermo-mechanical coupling mechanism of accelerated aging and a quantitative acceleration-factor system linking cyclic aging to autoclave service for lifetime prediction and structural optimization.Keywords
This publication has 26 references indexed in Scilit:
- Evolution of crosslinking structure in vulcanized natural rubber during thermal aging in the presence of a constant compressive stressPolymer Degradation and Stability, 2023
- Thermo‐Oxidative Aging Behavior and Lifetime Prediction of Rubber Latex Foam with Various Natural‐to‐Synthetic RatiosAdvanced Engineering Materials, 2023
- Finite Element Modeling and Simulation of Rubber Based Products: Application to Solid Resilient Tire2020
- Effects of crosslinking densities on mechanical properties of nitrile rubber composites in thermal oxidative aging environmentJournal of Applied Polymer Science, 2020
- Conversion of renewable vanillin into high performance polyimides via an asymmetric aromatic diamine derivationPolymer Degradation and Stability, 2019
- Stress–thermal oxidative aging behavior of hydrogenated nitrile rubber sealsJournal of Applied Polymer Science, 2018
- Investigation on the thermal oxidative aging mechanism and lifetime prediction of butyl rubberMacromolecular Research, 2012
- Stabilization of electronic properties of (1R)-(−)-10-camphorsulfonic acid doped polyaniline by UV irradiationPolymer Degradation and Stability, 2007
- Preferential melt intercalation of clay in ABS/brominated epoxy resin–antimony oxide (BER–AO) nanocomposites and its synergistic effect on thermal degradation and combustion behaviorPolymer Degradation and Stability, 2006
- The chemical and colloidal stability of polyaniline dispersionsPolymer Degradation and Stability, 2005