Effect of Transition Metals Oxides on the Physical and Mechanical Properties of Sintered Tungsten Heavy Alloys
Open Access
Abstract
The addition of transition element oxides to tungsten heavy alloys (WHAs) fabricated by powder metallurgy technique provides new materials with higher density and electrical conductivity, which may be adequate in some applications such as kinetic energy penetrators. Additionally, materials with higher electrical conductivity are required for electrical contact applications such as electrical discharge machining (EDM) electrode materials. WHAs were fabricated by compacting its mixed constituents followed by sintering. Ni, Co and Fe are used as binding phases of the tungsten particles and oxides of Zr, Ti and Y are used as oxide dispersing strengthening (ODS) agents of the sintered materials. The results show that all of the chosen factors (i.e., pressure of compaction process, temperature of sintering, type of binding material and type of oxide) have clear effects on all properties of ODS tungsten heavy alloy specimens. The density and electrical conductivity increase with the increase in sintering temperature. Hardness and compression strength were also measured to evaluate the mechanical properties of sintered samples.Keywords
This publication has 25 references indexed in Scilit:
- Hardness and tensile properties of tungsten based heavy alloys prepared by liquid phase sintering techniqueInternational Journal of Refractory Metals and Hard Materials, 2009
- An investigation on the solid state sintering of mechanically alloyed nano-structured 90W–Ni–Fe tungsten heavy alloyInternational Journal of Refractory Metals and Hard Materials, 2008
- Tensile behavior change depending on the varying tungsten content of W–Ni–Fe alloysInternational Journal of Refractory Metals and Hard Materials, 2007
- W/NiFe phase interfacial characteristics of liquid-phase sintered W–Ni–Fe alloyInternational Journal of Refractory Metals and Hard Materials, 2007
- Heating rate effects on microstructural properties of liquid phase sintered tungsten heavy alloysInternational Journal of Refractory Metals and Hard Materials, 2004
- Characteristics of densification and distortion of Ni–Cu liquid-phase sintered tungsten heavy alloyMaterials Science and Engineering: A, 2003
- Tungsten heavy alloy: deformation texture and recrystallization of tungsten particlesInternational Journal of Refractory Metals and Hard Materials, 2002
- Matrix pools in a partially mechanically alloyed tungsten heavy alloy for localized shear deformationMaterials Science and Engineering: A, 2002
- Some structural effects of plastic deformation on tungsten heavy metal alloysMaterials Science and Engineering: A, 2001
- Extensions to the Taguchi Method of Product DesignJournal of Mechanical Design, 1993