Evaluation of Three-Dimensional Environmental Hydraulic Modeling in Scour Hole
Open Access
- 15 April 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (8) , 4032
Abstract
The main goal of this study was comparing the performance of an open-source code OpenFOAM and a commercial software Ansys Fluent in simulating the turbulent flow through a scour hole developed in a sand bed channel, which helps to give a hint in choosing the appropriate calculating tool. Both models were set with the same mesh and as similar as possible numerical settings, with RANS turbulence modeling, applying the k-ωSST model, in transient simulations. The results of flow pattern, velocity, and turbulence properties were collected and compared with laboratory experimental data. The analyzed results showed that, although both of the two models cannot perfectly reproduce the values from a laboratory experiment, they can quite well capture the flow in scour hole near the wall, with a bit higher performance coming from the OpenFOAM model application.Keywords
Funding Information
- Incheon National University (Post-Doctoral Research Program (2018))
This publication has 14 references indexed in Scilit:
- Prediction of Seabed Scour Induced by Full-Scale Darrieus-Type Tidal Current TurbineJournal of Marine Science and Engineering, 2019
- Numerical modeling of flow around a pier mounted in a flat and fixed bedEnergy Procedia, 2019
- Two-dimensional Numerical Analysis on the Flow and Turbulence Structures in Artificial DunesKSCE Journal of Civil Engineering, 2018
- Numerical and Physical Investigation of the Performance of Turbulence Modeling Schemes around a Scour Hole Downstream of a Fixed Bed ProtectionWater, 2018
- Reliable Bridge Scour Simulation Using Eulerian Two-Phase Flow TheoryJournal of Computing in Civil Engineering, 2016
- Numerical investigation of flow and scour around a vertical circular cylinderPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2015
- Modeling of turbulent separated flows using OpenFOAMComputers & Fluids, 2013
- RANS simulation of ABL flow over complex terrains applying an Enhanced k-ε model and wall function formulation: Implementation and comparison for fluent and OpenFOAMJournal of Wind Engineering and Industrial Aerodynamics, 2012
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994
- Two-dimensional mathematical modelling of local-scour holesJournal of Hydraulic Research, 1993