Investigations into Particulate Emissions from Euro 5 Passenger Cars with DISI Engines Tested at Multiple Ambient Temperatures
Authors:
- 6 September 2015
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Particulate matter in vehicular exhaust is now under great scrutiny. In the EU, direct injection spark ignition (DISI) engines running on petrol now have limits for particulate emissions set for both mass and number. Current legislative test procedures represent a best-case scenario - more aggressive driving cycles and lower ambient temperatures can increase particulate emissions massively. Ambient temperature is generally the environmental parameter of most importance regarding particulate emissions from an engine, particularly for the reasonably brief periods of operation typical for passenger cars operating from a cold start. Two Euro 5 vehicles with DI SI engines were laboratory tested at three ambient temperatures on two different commercially available fuels, with particulate emissions results compared to results from the same fuels when the vehicles were tested at 25°C. Testing was performed on a chassis dynamometer in a climate-controlled test chamber, using the legislative European test procedure at a total of three test temperatures. The impact of the fuel type of particulate emissions was found to be vastly smaller than the impact of ambient temperature. Particulate emissions increased unambiguously to varying degrees as test temperature fell, sometimes by up to an order of magnitude, when compared to tests at 25°C, confirming the previous findings that temperatures lower than the legislative test temperature lead to increased particulate emissions, in terms of both mass and number. Continuous particle concentration data were used to examine specific periods of the cycle for the impact of ambient temperature.Keywords
This publication has 14 references indexed in Scilit:
- Evaluating the regulated emissions, air toxics, ultrafine particles, and black carbon from SI-PFI and SI-DI vehicles operating on different ethanol and iso-butanol blendsFuel, 2014
- New Combustion Concept for Turbocharged Gasoline Direct-Injection EnginesSAE International Journal of Engines, 2014
- Impact of gasoline composition on particulate matter emissions from a direct-injection gasoline engine: Applicability of the particulate matter indexInternational Journal of Engine Research, 2013
- Overview of Soot Emission Measurements Instrumentation: From Smoke and Filter Mass to Particle NumberSAE International Journal of Engines, 2013
- Investigations of Emission Control Systems for Gasoline Direct Injection Engines with a Focus on Removal of Particulate EmissionsTopics in Catalysis, 2013
- An examination of the effect of ethanol–gasoline blends' physicochemical properties on emissions from a light-duty spark ignition engineFuel Processing Technology, 2013
- Exhaust Particle Characterization for Lean and Stoichiometric DI Vehicles Operating on Ethanol-Gasoline BlendsSAE International Journal of Advances and Current Practices in Mobility, 2012
- Particle Emissions from a 2009 Gasoline Direct Injection Engine Using Different Commercially Available FuelsSAE International Journal of Fuels and Lubricants, 2010
- Research and Development of a New Direct Injection Gasoline Engine2000
- Automotive spark-ignited direct-injection gasoline enginesProgress in Energy and Combustion Science, 1999