Characterization of the 3YSZ/CNT/HAP coating on the Ti6Al4V alloy by electrophoretic deposition
Authors:
- 22 January 2021
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 109 (10) , 1395-1406
Abstract
In this article, the effects of the simultaneous addition of the 3 mol % yttria‐stabilized zirconia (3YSZ) and carbon nanotubes (CNTs) reinforcements on different properties of the natural hydroxyapatite (HAP) coating were studied. The electrophoretic deposition (EPD) process was implemented to prepare thin coatings on the Ti6Al4V substrate. The coatings were then sintered at 1000 ° C under vacuum for 2 hr and the mechanical properties of them were studied by the nano‐indentation method. The microsture and phase content of the coatings were investigated by the scanning electron microscope and X‐ray diffraction methods, respectively. The electrochemical properties of the samples were studied by potentiodynamic polarization and electrochemical impedance spectroscopy. The biocompatibility of the coatings was evaluated by the MTT test under standard conditions. It was found that the proper voltage and duration for the deposition of the coatings were 20 V and 4 min, while the longer deposition time of up to 6 min. Was tolerable in the coatings containing 5 wt % of the CNTs. The hardness and Young's modulus of the coatings were improved significantly by the siumultaneous addition of 3YSZ and CNTs, but the effect of nanotubes was more prominent. It was also found that the composite coating had marginally lower biocompatibility, as compared to the natural HAP, which was probably due to their lower roughness. The corrosion resistance of the HAP was not affected by the presence of 3YSZ particles, while the addition of CNTs improved the corrosion resistance of the coatings.Keywords
Funding Information
- Islamic Azad University
This publication has 58 references indexed in Scilit:
- Development of carbon nanotubes reinforced hydroxyapatite composite coatings on titanium by electrodeposition methodCorrosion Science, 2013
- Mechanical properties, electrochemical corrosion and in-vitro bioactivity of yttria stabilized zirconia reinforced hydroxyapatite coatings prepared by gas tunnel type plasma sprayingJournal of the Mechanical Behavior of Biomedical Materials, 2012
- Yttria-stabilized zirconia closed end tubes prepared by electrophoretic depositionCeramics International, 2011
- Electrophoretic deposition of biomaterialsJournal of The Royal Society Interface, 2010
- Fabrication and Characterization of HA-ZrO2-MWCNT Ceramic CompositesJournal of Composite Materials, 2009
- Electrophoretic deposition of carbon nanotube-reinforced hydroxyapatite bioactive layers on Ti–6Al–4V alloys for biomedical applicationsCeramics International, 2008
- Micro- and Nano-Indentation of a Hydroxyapatite-Carbon Nanotube CompositeJournal of Nanoscience and Nanotechnology, 2008
- Multi‐walled Carbon Nanotube‐Reinforced Hydroxyapatite Layers on Ti6Al4V Medical Implants by Electrophoretic Deposition (EPD)Advanced Engineering Materials, 2008
- Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effectsJournal of Materials Processing Technology, 2003
- Tetragonal zirconia polycrystal (TZP)—A reviewInternational Journal of High Technology Ceramics, 1987