Fabrication of Three-Dimensional Battery Using Ceramic Electrolyte with Honeycomb Structure by Sol–Gel Process
- 1 January 2010
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (4) , A493-A498
Abstract
(LLT) with a honeycomb structure, which has microsized holes on both sides of a membrane, was prepared as an electrolyte for three-dimensional all-solid-state rechargeable lithium-ion batteries. In this study, and were used as cathode and anode materials, respectively, and their particles were fabricated by the sol–gel method, which provided not only small particles to inject into the microsized holes of the honeycomb electrolyte (0.6 and for and , respectively) but also particles with high discharge capacities (98.6 and 90.2% of their theoretical capacities for and , respectively). The impregnation of active material particles mixed with the precursor sol into the honeycomb holes provided a good contact between the LLT electrolyte and the active materials, which reduced the internal resistance of the cell and improved the discharge capacity. Accordingly, the all-solid-state battery was successfully operated at 1.1 V with a discharge capacity of .Keywords
This publication has 18 references indexed in Scilit:
- Inorganic solid Li ion conductors: An overviewSolid State Ionics, 2009
- High-rate performance of all-solid-state lithium secondary batteries using Li4Ti5O12 electrodeJournal of Power Sources, 2009
- Fabrication and properties of a carbon/polypyrrole three-dimensional microbatteryJournal of Power Sources, 2008
- Review on composite polymer electrolytes for lithium batteriesPolymer, 2006
- Advanced materials for the 3D microbatteryJournal of Power Sources, 2006
- Characteristics of new-type solid polymer electrolyte controlling nano-structureJournal of Power Sources, 2005
- 3-D MicrobatteriesElectrochemistry Communications, 2003
- Fabrication and electrochemical characteristics of all-solid-state lithium-ion rechargeable batteries composed of LiMn2O4 positive and V2O5 negative electrodesJournal of Power Sources, 2001
- The effect of sintering on the grain boundary conductivity of lithium lanthanum titanatesSolid State Ionics, 2001
- Thin-film lithium and lithium-ion batteriesSolid State Ionics, 2000