Characterization of a multimode sample introduction system (MSIS) for multielement analysis of trace elements in high alloy steels and nickel alloys using axially viewed hydride generation ICP-AES
Authors:
- 25 July 2008
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 23 (9) , 1253-1262
Abstract
A commercial multimode sample introduction system (MSIS) was characterized for simultaneous multielement hydride and nonhydride-forming elements (As, Bi, Co, Cr, Fe, Mn, Mo, Ni, Sb, Se, Sn, Ti, V, W) in high alloy steels and nickel alloys by axially viewed ICP-AES. Vapor formed by the NaBH4 reaction and aerosol from a specially designed dual conical spray chamber and pneumatic nebulizer were injected simultaneously into a robust plasma. Spectroscopic effects caused by major and minor elements and nonspectroscopic interferences induced by matrix concomitants were evaluated both for conventional nebulization and for hydride generation. The objective of the study was to establish optimized operating conditions whereby both nonhydride and hydride forming elements could be determined simultaneously. It was observed that the sensitivities of the ‘hydride generating’ elements using a MSIS, were similar to those observed using conventional hydride generation. In comparison to conventional pneumatic nebulization, hydride LODs, were enhanced significantly by factors varying from about 2–20. Limits of detection using the MSIS, for nonhydride elements (Co, Cr, Fe, Mn, Mo, Ni, Ti, V, W) were similar to those reported for the conventional sample introduction system. Several fundamental parameters such as Mg II 280.270/Mg I 285.213 nm ratios, excitation temperature (Tex) and the effect of hydrogen were also determined. The effect of hydrogen, formed during hydride generation, on intensities of nonhydride and hydride forming elements and excitation temperature was evaluated. This is important because hydrogen can modify the properties of the ICP. The effect of variable concentrations of tartaric acid, L-cystein, EDTA, and 1,1,3,3-tetramethy-2-thiourea as retarding agents for reducing deleterious effects of Ni was investigated. The accuracy of the procedure was verified by analyzing several certified reference metallurgical samples. An important conclusion of this multielement study is that the application of the MSIS for simultaneous determination of hydride forming and non-hydride forming elements in complex metallurgical samples by ICP-AES is constrained by matrix derived spectral line interferences.Keywords
This publication has 27 references indexed in Scilit:
- A new demountable hydrofluoric acid resistant triple mode sample introduction system for ICP-AES and ICP-MSJournal of Analytical Atomic Spectrometry, 2006
- Dual nebulizer sample introduction system for simultaneous determination of volatile elemental hydrides and other elementsAnalytical and Bioanalytical Chemistry, 2006
- Chemical vapor generation: are further advances yet possible?Analytical and Bioanalytical Chemistry, 2005
- Hydride generation – recent advances in atomic emission spectrometryTrAC Trends in Analytical Chemistry, 2004
- A new sample introduction system for atomic spectrometry combining vapour generation and nebulization capacitiesJournal of Analytical Atomic Spectrometry, 2002
- Determination of arsenic, antimony, bismuth, germanium, tin, selenium and tellurium in 30% zinc sulfate solution by hydride generation inductively coupled plasma atomic emission spectrometryJournal of Analytical Atomic Spectrometry, 1999
- Mechanisms of transition metal interferences in hydride generation atomic-absorption spectrometry. Part 1. Influence of cobalt, copper, iron and nickel on selenium determinationThe Analyst, 1984
- Determination of antimony, arsenic, bismuth, selenium, tellurium, and tin in metallurgical samples using the hydride AA technique—I: Analysis of low-alloy steelsSpectrochimica Acta Part B: Atomic Spectroscopy, 1981
- Development of hydride generation methods for atomic spectroscopic analysisAnalytical Chemistry, 1979
- Determination of volatile hydride-forming metals in steel by atomic absorption spectrometryAnalytica Chimica Acta, 1976