Abstract
Iron‐based Fischer–Tropsch (FT) synthesis in combination with hydroisomerization in the presence of zeolites for the synthesis of isoparaffins from CO2/H2 was conducted in a fixed‐bed reactor. Relative to supported iron catalysts, the precipitated one efficiently converted intermediate CO into hydrocarbons by supplying a high density of FT active sites on the catalyst surface. Removing water by interstage cooling and promoting the CO conversion step in the FT synthesis were effective approaches in achieving a high CO2 conversion, because of an increase in the driving force to the reaction equilibrium. Particle mixing of 92.6 Fe7.4 K with either 0.5 Pd/β or HZSM‐5 zeolite effectively hydroisomerized the resulting FT hydrocarbons into gasoline‐range isoparaffins. Particularly, HZSM‐5 displayed a higher isoparaffin selectivity at approximately 70 %, which resulted from easier hydrocracking and hydroisomerization of the olefinic FT primary products.
Funding Information
  • National Natural Science Foundation of China (21576119)
  • Natural Science Foundation of Jiangsu Province (BK20151125)

This publication has 40 references indexed in Scilit: