Effect of Oil Quenching and Shot Peening to Improve Hardness Behavior of S45C Carbon Steel
- 10 August 2022
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1067, 27-33
Abstract
S45C carbon steel is widely used as a raw material for tools and automotive components. In machine components, a material that has hard and ductile properties is also needed, with this problem, of course, it is necessary to have material engineering to improve the mechanical properties of steel in order to obtain good quality. The heat treatment process on the material has the advantage of improving mechanical properties. The purpose of this study was to determine the effect of heat treatment and shot peening on the mechanical properties and microstructure of the S45C carbon steel surface. S45C carbon steel was heat-treated at 900 oC and held for 15 minutes, then quenched using oil media. Next, the shot peening process was carried out with pressure variations of 4, 5, 6, and 7 bar for 20 minutes. Hardness testing was carried out using micro Vickers with a load of 0.49 N for 10 seconds. The results of the heat treatment on S45C material experienced an increase in hardness of 251.56 VHN compared to non-treatment, namely 187.38 VHN. Specimens that have been heated treated and shot peening with pressure variations of 4, 5, 6, and 7 bar experienced an increase in hardness of 286.18, 289.22, 357.24, and 450.22 VHN. The microstructure of the heat treatment material is formed by the phases of ferrite, pearlite, and martensite. The pearlite structure is denser and denser, showing increased hardness compared to non-treated S45C. Furthermore, the cross-sectional microstructure shows the depth of the shot peening effect as far as 130 μm. The surface of the specimen has a denser structure than the raw material.Keywords
This publication has 7 references indexed in Scilit:
- Corrosion Protection on AISI 304 by Shot Peening Treatment with Variation of Particle Size and Shooting PressureMaterials Science Forum, 2022
- Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysisHeliyon, 2020
- Experimental study of the effect of a slow-cooling heat treatment on the mechanical properties of high strength steelsConstruction and Building Materials, 2020
- Increased Corrosion Resistance On Cu35%Zn Surface By Shot Peening ProcessJournal of Physics: Conference Series, 2020
- Microstructural assessment of AISI 1021 steel under rapid cyclic heat treatment processResults in Engineering, 2019
- Increased Hardness, Corrosion Resistant and Corrosion Fatigue Cracking Performance on AISI 304 by DC SputteringInternational Review of Mechanical Engineering (IREME), 2018
- Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different MediaInternational Journal of Engineering Research in Africa, 2017