Biomass to liquid transportation fuels (BTL) systems: process synthesis and global optimization framework
- 14 November 2012
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 6 (1) , 267-287
Abstract
An optimization-based process synthesis framework is proposed for the thermochemical conversion of biomass to liquid fuels (BTL). Gasification of biomass is used to generate synthesis gas which can be converted to raw hydrocarbons either directly using Fischer–Tropsch synthesis or indirectly using catalytic conversion of methanol over ZSM-5. Multiple technologies are considered for generation of the raw hydrocarbons including (i) six types of Fischer–Tropsch units with different temperatures, catalyst types, and hydrocarbon effluent compositions, (ii) methanol conversion using methanol-to-gasoline, and (iii) methanol conversion using methanol-to-olefins. The hydrocarbons are upgraded into the final liquid fuel products (i.e., gasoline, diesel, and kerosene) using one or more technologies including ZSM-5 catalytic conversion, oligomerization, hydrocracking, isomerization, alkylation, and hydrotreating. A simultaneous heat, power, and water integration is included within the process synthesis framework to directly examine the costs associated with utility production and wastewater treatment with a particular topological design. A rigorous global optimization branch-and-bound strategy is implemented to mathematically guarantee the development of a BTL refinery that is economically and environmentally superior to all competing designs. Twenty-four case studies are investigated to determine the effect of refinery capacity, liquid fuel composition, and biomass feedstock on the overall system cost, the BTL refinery topological design, the process material/energy balances, and the lifecycle greenhouse gas emissions.Keywords
This publication has 102 references indexed in Scilit:
- Environmental Impacts and Costs of Hydrotreated Vegetable Oils, Transesterified Lipids and Woody BTL—A ReviewEnergies, 2011
- Facility Location and Supply Chain Optimization for a BiorefineryIndustrial & Engineering Chemistry Research, 2011
- Impacts of facility size and location decisions on ethanol production costEnergy Policy, 2011
- Technoeconomic analysis of a low CO2 emission dimethyl ether (DME) plant based on gasification of torrefied biomassEnergy, 2010
- Multistage optimization of the supply chains of biofuelsTransportation Research Part E: Logistics and Transportation Review, 2010
- Fischer–Tropsch diesel production in a well-to-wheel perspective: A carbon, energy flow and cost analysisEnergy Conversion and Management, 2009
- A spatially explicit whole-system model of the lignocellulosic bioethanol supply chain: an assessment of decentralised processing potentialBiotechnology for Biofuels, 2008
- Sustainable fuel for the transportation sectorProceedings of the National Academy of Sciences, 2007
- Global optimization in the 21st century: Advances and challengesComputers & Chemical Engineering, 2005
- PrefaceJournal of Global Optimization, 1995