Measurements of Pile Load Transfer
Authors:
- 1 January 1969
- book chapter
- Published by ASTM International
- p. 106-117
Abstract
Load transfer data are presented for six piles embedded in sand. The data were adjusted to account for residual loads caused by driving in order to arrive at the true variation of skin friction with depth. Residual loads of 25 to 48 tons were observed for conventionally driven piles, whereas the load for a pile driven with a vibratory hammer did not exceed the weight of the driver. Friction during compression was found to exceed that during tension by 30 percent. An average lateral earth pressure coefficient of 1.1 was observed, with a value of 0.75 being observed for a jetted pile. The data indicate that conventional hammers may compact the soil below the pile tip and improve point bearing capacity. Skin friction adjacent to the pile tip was found to be significantly lower than for other parts of the pile.Keywords
This publication has 2 references indexed in Scilit:
- Sand Displacement and Compaction around Model Friction PilesCanadian Geotechnical Journal, 1964
- Pile Tests, Low-Sill Structure, Old River, LouisianaTransactions of the American Society of Civil Engineers, 1958