Effect of Wax Additives and Silanization of Diatom Surfaces on Thermomechanical Properties of Polylactide Composites
Authors:
- Marta DobrosielskaMDMarta Dobrosielska
- Renata DobruckaRDRenata Dobrucka
- Martyna Pajewska-SzmytMPMartyna Pajewska-Szmyt
- Paulina KozeraPKPaulina Kozera
- Ewa GabrielEGEwa Gabriel
- Julia GłowackaJGJulia Głowacka
- Dariusz BrząkalskiDBDariusz Brząkalski
- Krzysztof J. KurzydłowskiKKKrzysztof J. Kurzydłowski
- Robert E. PrzekopRobert E. Przekop
Open Access
Abstract
In the present study, tests were conducted on high-filled composite samples on a polylactide matrix, modified with diatomaceous earth, three types of silanes, and natural and synthetic wax. The obtained samples were characterized in terms of the effect of modifications on mechanical properties (tensile strength, flexural strength, and impact resistance) or processing properties, e.g., melt flow rate (MFR). The study showed that the modification had a favorable effect on the processing properties of the composites, associated with up to an eight-fold increase in flow rate index compared with the reference sample, especially for samples treated with methyltrimethoxysilane (MTMOS), and up to a ten-fold increase under low shear-rate flow conditions. The effect of the addition of waxes of different origins (synthetic and natural) was also determined, and it was shown that beeswax tended to reduce the flow rate of the composites regardless of the silane used. The addition of synthetic wax to composites increased the tendency to agglomerate diatomaceous earth, while natural wax had a positive effect on filler dispersion.Keywords
Funding Information
- frame of the project “Advanced Biocomposites for Tomorrow’s Economy BIOG-NET” (FNP POIR.04.04.00-00-1792/18-00)
- TEAM-NET program of the Foundation for Polish Science
- European Regional Development Fund
This publication has 28 references indexed in Scilit:
- Enhanced durability of sustainable poly (lactic acid)-based composites with renewable starch and wood flourJournal of Cleaner Production, 2018
- Processing of Thermoplastic PLA/Cellulose Nanomaterials CompositesPreprints.org, 2018
- A study of mechanical and morphological properties of PLA based biocomposites prepared with EJO vegetable oil based plasticiser and kenaf fibresMaterials Research Express, 2018
- Effects of bamboo cellulose nanowhisker content on the morphology, crystallization, mechanical, and thermal properties of PLA matrix biocompositesComposites Part B: Engineering, 2018
- Mechanical properties and thermal characteristics of poly(lactic acid) and paraffin wax blends prepared by conventional melt compounding and sub-critical gas-assisted processing (SGAP)European Polymer Journal, 2018
- Manufacturing and characterization of poly(lactic acid) composites with hydroxyapatiteJournal of Thermoplastic Composite Materials, 2017
- Comparison of the influence of talc and kaolinite as inorganic fillers on morphology, structure and thermomechanical properties of polylactide based compositesApplied Clay Science, 2015
- Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matricesJournal of Thermoplastic Composite Materials, 2011
- Silane adsorption onto cellulose fibers: Hydrolysis and condensation reactionsJournal of Colloid and Interface Science, 2005
- Beeswax—Composition and AnalysisBee World, 1980