Influence of polymer impurity on the mechanochemical dechlorination reaction of polyvinyl chloride
Authors:
- Tsuyoshi InoueTITsuyoshi Inoue
- Junya JunyaJJJunya Junya
- Fumio FumioFFFumio Fumio
- 1 January 2006
- journal article
- Published by Elsevier in Advanced Powder Technology
- Vol. 17 (4) , 425-432
Abstract
Polyethylene, polypropylene, polystyrene and polybutadiene samples were chosen as model impurities, and each impurity was added to a polyvinyl chloride (PVC) solid sample together with a NaOH solid sample. The mixture of PVC with an impurity sample was ground with the NaOH sample in air by means of a planetary ball mill to investigate the mechanochemical dechlorination reaction between PVC and NaOH. The presence of any impurity inhibits the mechanochemical reaction of PVC and the degree of inhibition caused by the impurity is correlated with its hardness. The dechlorination yield increases with an increase in the amount of NaOH, reaching almost the same value as in the case without any impurity.Keywords
This publication has 4 references indexed in Scilit:
- Dechlorination of polyvinyl chloride by its grinding with KOH and NaOHAdvanced Powder Technology, 2005
- Mechanochemical dechlorination of polyvinyl chloride by co-grinding with various metal oxidesAdvanced Powder Technology, 2004
- Mechanochemical Dechlorination of PVCs with Different Chlorine ContentsJournal of the Society of Powder Technology, Japan, 2004
- Dechlorination of PVC by a Mechanochemical Treatment under Atmospheric Condition.Journal of the Society of Powder Technology, Japan, 1999