A Varifocal Convex Micromirror Driven by a Bending Moment
Authors:
- 27 May 2009
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 15 (5) , 1310-1316
Abstract
A varifocal micromirror is designed and fabricated using silicon micromachining technology. A spherical convex surface of mirror is generated by applying a bending moment to the circumference of micromirror. This method is different from the conventional technique in which a distributed force is exerted on the central area of mirror. On the basis of the theory of materials strength, the deformation of a plate is purely spherical if only a bending moment is applied to the circumference. Spherical surface is well approximated to be a parabola if deflection is small. In order to generate only a bending moment, a force is applied to the plate in the region outside the fulcrum, by which the plate is supported freely in rotation. The proposed mirror was fabricated from a silicon on insulator wafer and a glass plate, which were connected by anodic bonding. The deviation in surface profile of mirror from a parabola was measured with an optical interferometer to be less than 4.7 nm rms in the mirror region inside the 400-mum-diameter fulcrum at the voltage lower than 215 V. The focal length of the fabricated mirror was varied from approximate infinity to 24 mm.Keywords
This publication has 13 references indexed in Scilit:
- Ultrathin cameras using annular folded opticsApplied Optics, 2007
- Design of spherically corrected, achromatic variable-focus liquid lensesOptics Express, 2007
- A new approach for focusing deformable mirrors fabricated in polymer technology2006
- Distortion optimized focusing mirror device with large apertureSensors and Actuators A: Physical, 2006
- 3-D MOEMS Mirror for Laser Beam Pointing and Focus ControlIEEE Journal of Selected Topics in Quantum Electronics, 2004
- Influence of Silicon on Insulator Wafer Stress Properties on Placement Accuracy of Stencil MasksJapanese Journal of Applied Physics, 2002
- Micromachined silicon nitride deformable mirrors for focus controlOptics Letters, 2001
- Quick focusing of imaging optics using micromachined adaptive mirrorsOptics Communications, 1997
- Determining mean and gradient residual stresses in thin films using micromachined cantileversJournal of Micromechanics and Microengineering, 1996
- Three-Dimensional Display and Analysis of Tomographic Volume Images Utilizing a Varifocal MirrorIEEE Transactions on Medical Imaging, 1986