Formation Cycle Control for Enhanced Structural Stability of Ni-Rich LiNixCoyMn1-x-yO2 Cathodes
- 9 January 2025
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (2) , 2136-2147
Abstract
Nickel-rich NCM cathode materials promise lithium-ion batteries with a high energy density. However, an increased Ni fraction in the cathode leads to complex phase transformations with electrode-electrolyte side reactions, which cause rapid capacity fading. Here, we show that an initial formation cycle at 0.1 C with a higher cutoff voltage (≥4.35 V) increases the stability of Ni-rich NCM (LiNi0.88Co0.08Mn0.04O2) particles during cycling at 1 C. We unveil that the formation of intragranular nanovoids is directly associated with the initial formation cycle at a lower charging cutoff voltage when oxygen vacancies are introduced at the Ni-rich NCM particle surface, due to irreversible electrolyte decomposition at the cathode-electrolyte interface. Nanovoid evolution of the Ni-rich NCM particles after 50 cycles increases the NiO-like rock salt phase; it results in intragranular cracks, which cause structural instability via heterogeneous phase distribution. This work demonstrates the importance of controlling Ni-rich NCM surface chemistry from the initial formation cycle to achieve better cycling stability.Keywords
Funding Information
- National Research Foundation of Korea (NRF-2021R1A2C1011046)
- Ministry of Trade, Industry and Energy (RS-2023-00254880)
This publication has 57 references indexed in Scilit:
- Tungsten Boride Stabilized Single‐Crystal LiNi0.83Co0.07Mn0.1O2 Cathode for High Energy Density Lithium‐Ion Batteries: Performance and MechanismsAdvanced Functional Materials, 2023
- Stabilizing High‐Nickel Cathodes with High‐Voltage ElectrolytesAdvanced Functional Materials, 2023
- Degradation Pathways of Cobalt‐Free LiNiO2 Cathode in Lithium BatteriesAdvanced Functional Materials, 2022
- Multi‐Element Surface Coating of Layered Ni‐Rich Oxide Cathode Materials and Their Long‐Term Cycling Performance in Lithium‐Ion BatteriesAdvanced Materials Interfaces, 2021
- Challenges and Strategies to Advance High‐Energy Nickel‐Rich Layered Lithium Transition Metal Oxide Cathodes for Harsh OperationAdvanced Functional Materials, 2020
- Building High‐Rate Nickel‐Rich Cathodes by Self‐Organization of Structurally Stable MacrovoidAdvanced Science, 2020
- Chemical, Structural, and Electronic Aspects of Formation and Degradation Behavior on Different Length Scales of Ni‐Rich NCM and Li‐Rich HE‐NCM Cathode Materials in Li‐Ion BatteriesAdvanced Materials, 2019
- High‐Voltage Charging‐Induced Strain, Heterogeneity, and Micro‐Cracks in Secondary Particles of a Nickel‐Rich Layered Cathode MaterialAdvanced Functional Materials, 2019
- Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion BatteriesAdvanced Energy Materials, 2019
- Revisiting Primary Particles in Layered Lithium Transition‐Metal Oxides and Their Impact on Structural DegradationAdvanced Science, 2019