Plasma cleaning of the SLAC Linac Coherent Light Source II high energy verification cryomodule cavities
Open Access
- 12 October 2022
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (10) , 102001
Abstract
Plasma cleaning is a technique that can be applied in superconducting radio-frequency cavities in situ in cryomodules to decrease their level of field emission (FE). We developed the technique for Linac Coherent Light Source II (LCLS-II) cavities and we present in this paper the full development and application of plasma processing to the LCLS-II High Energy verification cryomodule (vCM). We validated our plasma processing procedure on the vCM, fully processing four out of eight cavities of this CM, demonstrating that cavity performance was preserved in terms of both accelerating field and quality factor. Applying plasma processing to this clean, record breaking cryomodule also showed that no contaminants were introduced in the string, maintaining the vCM FE-free up to the maximum field reached by each cavity. We also found that plasma processing eliminates multipacting (MP)-induced quenches that are frequently observed within the MP band field range. This suggests that plasma processing could be employed in situ in CMs to mitigate both FE and MP, significantly decreasing the testing time of cryomodules, the linac commissioning time and cost, and increasing the accelerator reliability.Keywords
All Related Versions
Funding Information
- U.S. Department of Energy (DE-AC05-06OR23177 (Fermilab), DE-AC02-76F00515 (SLAC), DE-AC05-00OR22725 (ORNL))
This publication has 11 references indexed in Scilit:
- Field emission mitigation studies in the SLAC Linac Coherent Light Source II superconducting rf cavities via in situ plasma processingPhysical Review Accelerators and Beams, 2021
- Plasma ignition and detection for in-situ cleaning of 1.3 GHz 9-cell cavitiesJournal of Applied Physics, 2019
- In-situ plasma cleaning to decrease the field emission effect of half-wave superconducting radio-frequency cavitiesNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2018
- Ignition and monitoring technique for plasma processing of multicell superconducting radio-frequency cavitiesJournal of Applied Physics, 2016
- LCLS-II High Energy (LCLS-II-HE): A transformative X-ray laser for science2016
- In-situ plasma processing to increase the accelerating gradients of superconducting radio-frequency cavitiesNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2016
- Nitrogen and argon doping of niobium for superconducting radio frequency cavities: a pathway to highly efficient accelerating structuresSuperconductor Science and Technology, 2013
- RF Superconductivity2009
- Superconducting TESLA cavitiesPhysical Review Special Topics - Accelerators and Beams, 2000
- Electron emission in intense electric fieldsProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1928