Control of a Doubly Fed Induction Generator via an Indirect Matrix Converter With Changing DC Voltage
- 28 January 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 58 (10) , 4664-4674
Abstract
This paper presents a control strategy for a doubly fed induction generator (DFIG) using an indirect matrix converter, which consists of an input side matrix converter and an output side voltage source converter (VSC). The capability of the input converter to generate different “virtual dc link” voltage levels is exploited. The commutation of the VSI with reduced voltage is illustrated for operating points where the output voltage demand is low without any deterioration of the current control performance. The proposed method leads to a reduction in the commutation losses in the output converter and reduced common-mode voltage. For the input converter, soft switching commutation is obtained by synchronizing the input and output converter pulsewidth-modulation patterns. This modulation strategy is particularly applicable in DFIG applications because the required rotor voltage decreases when the DFIG speed is close to the synchronous speed. The complete control strategy is experimentally validated using a 2-kW rig.Keywords
This publication has 19 references indexed in Scilit:
- Control of a Doubly-fed Induction Generator with an Indirect Matrix Converter with changing DC voltage2010
- Direct Virtual Torque Control for Doubly Fed Induction Generator Grid ConnectionIEEE Transactions on Industrial Electronics, 2009
- Predictive Current Control of Doubly Fed Induction GeneratorsIEEE Transactions on Industrial Electronics, 2009
- Control of the Reactive Power Supplied by a WECS Based on an Induction Generator Fed by a Matrix ConverterIEEE Transactions on Industrial Electronics, 2008
- Stabilization of Induction Motor Drives With Poorly Damped Input FiltersIEEE Transactions on Industrial Electronics, 2007
- Analysis of Input Filter Interactions in Switching Power ConvertersIEEE Transactions on Power Electronics, 2007
- Modulation Method for a Multiple Drive System Based on a Two-Stage Direct Power Conversion Topology With Reduced Input Current RippleIEEE Transactions on Power Electronics, 2005
- Novel modulation schemes minimizing the switching losses of sparse matrix converters2004
- A new cost-effective multi-drive solution based on a two-stage direct power electronic conversion topology2003
- Doubly fed induction generator usingback-to-back PWM convertersand its application to variable-speed wind-energy generationIEE Proceedings - Electric Power Applications, 1996