Band Gap Engineering of Zinc Selenide Thin Films Through Alloying with Cadmium Telluride
- 20 May 2013
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 5 (11) , 5366-5372
Abstract
This work investigates band gap engineering of zinc selenide (ZnSe) thin films. This was achieved by mixing ZnSe with cadmium telluride (CdTe). The mass ratio (x) of CdTe in the starting material was varied in the range x = 0–0.333. The films were prepared using thermal evaporation. The chemical composition of the films was investigated through energy dispersive spectroscopy and Rutherford backscattering spectrometry. Structural analysis was carried out using X-ray diffraction and atomic force microscopy. Normal incidence transmittance and reflectance were measured over the wavelength range 300–1300 nm. The absorption coefficients and band gaps were determined from these spectrophotometric measurements. The band gap monotonically decreased from 2.58 eV (for x = 0) to 1.75 eV (for x = 0.333). Photocurrent measurements indicated that the maximum current density was obtained for films with x = 0.286. A figure of merit, based on crystallinity, band gap, and photocurrent, was defined. The optimum characteristics were obtained for the films with x = 0.231, for which the band gap was 2.14 eV.Keywords
This publication has 32 references indexed in Scilit:
- Nanocrystalline ZnSe thin films prepared by solution growth technique for photosensor applicationComposites Part B: Engineering, 2013
- 840 mW continuous-wave Fe:ZnSe laser operating at 4140 nmOptics Letters, 2012
- Photoconductivity and photo-detecting properties of vacuum deposited ZnSe thin filmsSolid State Sciences, 2011
- Band Gap Modulation of the IV, III–V, and II–VI Semiconductors by Controlling the Solid Size and Dimension and the Temperature of OperationThe Journal of Physical Chemistry C, 2011
- Design Guidelines for True Green LEDs and High Efficiency Photovoltaics Using ZnSe/GaAs Digital AlloysElectrochemical and Solid-State Letters, 2010
- ZnTe/ZnSe (Core/Shell) Type-II Quantum Dots: Their Optical and Photovoltaic PropertiesChemistry of Materials, 2009
- Semiconductor Nanocrystals: Structure, Properties, and Band Gap EngineeringAccounts of Chemical Research, 2009
- The effect of nitrogen ion implantation on the structural, optical and electrical properties of ZnSe thin filmsSemiconductor Science and Technology, 2006
- Properties of cu-doped low resistive ZnSe films deposited by two-sourced evaporationVacuum, 2005
- Band-gap engineering in sputter-deposited ScxGa1−xNApplied Physics Letters, 2001