A Printed Log-Periodic Dipole Array (LPDA) Antenna for 5G Application
Authors:
- 1 October 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Abstract
This paper presents stage in the create a printed Log-periodic dipole array antenna (LPDA) for applications of 5G network which operates frequency at 3.4-3.8 GHz. The antenna has been designed using Antenna Magus and CST Studio Suite 2019, and then realized. Measured result show that the LPDA with 7.5 × 14 .6 × 0 .16 cm on FR4 substrate get VSWR of 1.205, return loss of −20.631, bandwidth of 950 Mhz at frequency operation 2.78-3.73 GHz and gain of 3.1 dBi on the center frequency range.Keywords
This publication has 8 references indexed in Scilit:
- Planar microstrip series-fed array for 5G applications with beamforming capabilities2018
- Miniature MIMO Antennas for 5G Mobile Terminals2018
- Design of circular ring microstrip patch antenna with an H-shaped slot on the ground plane for WiMAX2017
- Design of a printed log-periodic dipole antenna (LPDA) for 0.8–2.5 GHz band applications2016
- A Printed LPDA Fed by a Coplanar Waveguide for Broadband ApplicationsIEEE Antennas and Wireless Propagation Letters, 2013
- A compact microstrip ultra-wideband (UWB) antenna for VHF/UHF band applications2013
- DESIGN OF A PRINTED LOG-PERIODIC DIPOLE ARRAY FOR ULTRA-WIDEBAND APPLICATIONSProgress in Electromagnetics Research C, 2013
- Wide bandwidth and small size LPDA antenna2012