A Bio-Based Render for Insulating Agglomerated Cork Panels
Open Access
Abstract
Natural and bio-based thermal insulation materials play an important role in the lifecycle impact of buildings due to their influence on the amount of energy used in indoor temperature control and the environmental impact of building debris. Among bio-based materials, cork is widespread in the Mediterranean region and is one of the bio-based materials that is most frequently used as thermal insulation for buildings. A particular problem is the protection of the cork-agglomerated panels from external stress and adverse weather conditions; in fact, cork granulates are soft and, consequently, cork panels could be damaged by being hit or by excessive sun radiation. In this study, an innovative external coat for cork-agglomerated panels made of a blending composite of beeswax and rosin (colophony) is proposed. The performance of this composite, using different amounts of elements, was analysed to discover which mix led to the best performance. The mix of 50% beeswax and 50% rosin exhibited the best performance out of all the mixes. This blend demonstrated the best elongation and the lowest fracture density, characteristics that determine the durability of the coating. A performance comparison was carried out between cork panel samples coated with lime render and beeswax–rosin coating. The coating of beeswax and resin highlighted a detachment value about 3.5 times higher than the lime plaster applied on the side of the cork.Keywords
This publication has 50 references indexed in Scilit:
- Green material composites from renewable resources: Polymorphic transitions and phase diagram of beeswax/rosin resinThermochimica Acta, 2011
- Analyzing the effect of the longwave emissivity and solar reflectance of building envelopes on energy-saving in buildings in various climatesSolar Energy, 2011
- Cork Composites: A ReviewMaterials, 2009
- Suberin — a biopolyester forming apoplastic plant interfacesCurrent Opinion in Plant Biology, 2007
- Modeling the effects of surface roughness on the emissivity of aluminum alloysInternational Journal of Heat and Mass Transfer, 2006
- RILEM recommendation MDT. D.3—Determination “in situ” of the adhesive strength of rendering and plastering mortars to their substrateMaterials and Structures, 2004
- Durometer Hardness and the Stress-Strain Behavior of Elastomeric MaterialsRubber Chemistry and Technology, 2003
- Effect of roughness on the emissivity of the precious metals silver, gold, palladium, platinum, rhodium, and iridiumHigh Temperatures-High Pressures, 2001
- Declared value for the thermal conductivity coefficient of insulation corkboardWood Science and Technology, 1997
- A concept of compromise solutions and the method of the displaced idealComputers & Operations Research, 1974