Numerical Models of Pore Pressure and Stress Changes Along Basement Faults Due to Wastewater Injection: Applications to the 2014 Milan, Kansas Earthquake
Open Access
- 16 April 2018
- journal article
- research article
- Published by Wiley in Geochemistry, Geophysics, Geosystems
- Vol. 19 (4) , 1178-1198
Abstract
We have developed groundwater flow models to explore the possible relationship between wastewater injection and the 12 November 2014 Mw 4.8 Milan, Kansas earthquake. We calculate pore pressure increases in the uppermost crust using a suite of models in which hydraulic properties of the Arbuckle Formation and the Milan earthquake fault zone, the Milan earthquake hypocenter depth, and fault zone geometry are varied. Given pre‐earthquake injection volumes and reasonable hydrogeologic properties, significantly increasing pore pressure at the Milan hypocenter requires that most flow occur through a conductive channel (i.e., the lower Arbuckle and the fault zone) rather than a conductive 3‐D volume. For a range of reasonable lower Arbuckle and fault zone hydraulic parameters, the modeled pore pressure increase at the Milan hypocenter exceeds a minimum triggering threshold of 0.01 MPa at the time of the earthquake. Critical factors include injection into the base of the Arbuckle Formation and proximity of the injection point to a narrow fault damage zone or conductive fracture in the pre‐Cambrian basement with a hydraulic diffusivity of about 3–30 m2/s. The maximum pore pressure increase we obtain at the Milan hypocenter before the earthquake is 0.06 MPa. This suggests that the Milan earthquake occurred on a fault segment that was critically stressed prior to significant wastewater injection in the area. Given continued wastewater injection into the upper Arbuckle in the Milan region, assessment of the middle Arbuckle as a hydraulic barrier remains an important research priority.Keywords
Funding Information
- U.S. Geological Survey (G15AP00090, G17AP00128)
This publication has 60 references indexed in Scilit:
- Towards quantifying the matrix permeability of fault damage zones in low porosity rocksEarth and Planetary Science Letters, 2012
- Influence of macro-fractures and micro-fractures on permeability and elastic wave velocities in basalt at elevated pressureTectonophysics, 2011
- The nature and origin of off-fault damage surrounding strike-slip fault zones with a wide range of displacements: A field study from the Atacama fault system, northern ChileJournal of Structural Geology, 2009
- In situ measurement of the hydraulic diffusivity of the active Chelungpu Fault, TaiwanGeophysical Research Letters, 2006
- The role of hydromechanical coupling in fractured rock engineeringHydrogeology Journal, 2003
- Floods, channel change, and the hyporheic zoneWater Resources Research, 1999
- Determination of fracture storativity in hard rocks using high‐pressure injection testingWater Resources Research, 1998
- The process zone: A microstructural view of fault growthJournal of Geophysical Research, 1998
- Permeability of fault-related rocks, and implications for hydraulic structure of fault zonesJournal of Structural Geology, 1997
- Earthquake source scaling relationships from −1 to 5 ML using seismograms recorded at 2.5‐km depthJournal of Geophysical Research, 1995