The bond strength of sprayed-aluminium coatings on grit blasted steel substrates was shown to be highly dependent on surface preparation. Type and condition of the grit and the angle of blasting markedly influenced bond strength but variations of blasting pressure, blasting speed, and nozzle–substrate distance had no effect. With chilled iron angular grit, failure occurred mainly at the sprayed metal–substrate interface. The level of bond strength was reduced when blunted grit or low blasting angles were used. With alumina grit the bond strength was increased and the failure location moved from the interface to within the spray coating. Examination of grit blasted surfaces with the scanning-electron microscope gave an indication of the cause of the above behavior in terms of surface roughness and surface debris. The work indicates that bonding between flame-sprayed aluminium and steel substrates is of a mechanical rather than metallurgical nature. From the technological viewpoint, the importance of grit condition and blasting angle can be seen and simple rules of surface preparation formulated.