Characteristics of Al-Si Alloys with High Melting Point Elements for High Pressure Die Casting
Open Access
Abstract
This paper is devoted to the possibility of increasing the mechanical properties (tensile strength, yield strength, elongation and hardness) of high pressure die casting (HPDC) hypoeutectic Al-Si alloys by high melting point elements: chromium, molybdenum, vanadium and tungsten. EN AC-46000 alloy was used as a base alloy. The paper presents the effect of Cr, Mo, V and W on the crystallization process and the microstructure of HPDC aluminum alloy as well as an alloy from the shell mold. Thermal and derivative analysis was used to study the crystallization process. The possibility of increasing the mechanical properties of HPDC hypoeutectic alloy by addition of high-melting point elements has been demonstrated.Keywords
This publication has 26 references indexed in Scilit:
- Tensile and fatigue properties of a cast aluminum alloy with Ti, Zr and V additionsMaterials Science and Engineering: A, 2011
- The influence of Cr content on the microstructure and mechanical properties of AlSi9Cu3(Fe) die-casting alloysMaterials Science and Engineering: A, 2010
- Thermal analysis and microscopical characterization of Al–Si hypereutectic alloysJournal of Alloys and Compounds, 2006
- The influence of Mn and Cr on the tensile properties of A356–0.20Fe alloyMaterials Letters, 2006
- The effect of iron and manganese on the formation of intermetallic compounds in aluminum–silicon alloysMaterials Science and Engineering: A, 2004
- Thermodynamic computation of the Mo-V binary phase diagramJournal of Phase Equilibria and Diffusion, 1999
- The Cr−Mo (Chromium-Molybdenum) systemBulletin of Alloy Phase Diagrams, 1987
- The Cr−W (Chromium−Tungsten) systemBulletin of Alloy Phase Diagrams, 1984
- The Al-Si (Aluminum-Silicon) systemBulletin of Alloy Phase Diagrams, 1984
- The Cr−V (Chromium-Vanadium) systemJournal of Phase Equilibria and Diffusion, 1982