Effect of Chemical Composition on Sag Resistance of Suspension Spring
Authors:
- 1 February 1982
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This paper summarizes a laboratory study aimed at revealing the effect of chemical elements. Si, Cr, Mo and V, on the sag resistance and developing new steels with all the characteristics required for suspension coil spring in comparison with AISI 9260. It was found that as far as sag resistance is concerned an optimum silicon content exist (1.5 silicon) and chromium deteriorates sag resistance and molybdenum and vanadium improve it. Further studies showed that Si-Cr-V steels are the best spring steels available, particularly 1.5Si-0.5Cr-G.2V steel has all the required characteristics, e.g., good sag resistance, good decarburizing resistance and sufficient hardenability.Keywords
This publication has 2 references indexed in Scilit:
- Steels for Automotive Coil Springs With Improved Resistance to RelaxationSAE International Journal of Advances and Current Practices in Mobility, 1980
- Laboratory Studies of Low-Chromium and Chromium-Free Steels for Suspension Coil SpringsSAE International Journal of Advances and Current Practices in Mobility, 1980