An Integrated AC Choke Design for Common-Mode Current Suppression in Neutral-Connected Power Converter Systems
Authors:
- 1 March 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 27 (3) , 1228-1236
Abstract
This paper presents an integrated ac choke that incorporates the common-mode (CM) suppression function into a three-phase differential-mode (DM) inductor. The proposed choke, together with other filter components, provides a transformerless solution to issues caused by the switching CM voltage in neutral-connected power converter systems. The required high CM-to-DM inductance ratio is generated by different magnetic paths in the novel structure. An approach based on magnetic circuit calculation can be applied to the weight-minimized design in which a reasonably small core loss confirms the choke's heat dissipation capability. The existence and uniqueness of the optimization are proven by a design example and analysis. Comparison to separate DM and CM inductors demonstrates the benefits of integration: the iron and copper material savings, the volume and weight reduction, and overall system efficiency improvement. The finite element method is used to tune the design parameters with which a prototype is implemented. The simulation and experimental results of the prototype in a voltage source converter verify the feasibility and effectiveness of the integrated choke.Keywords
This publication has 36 references indexed in Scilit:
- Analysis of CM Volt-Second Influence on CM Inductor Saturation and Design for Input EMI Filters in Three-Phase DC-Fed Motor Drive SystemsIEEE Transactions on Power Electronics, 2010
- Simulation Model of Common-Mode Chokes for High-Power ApplicationsIEEE Transactions on Industry Applications, 2010
- Finite-Element Modeling of Saturation Effect Excited by Differential-Mode Current in a Common-Mode ChokeIEEE Transactions on Power Electronics, 2009
- Scaling Issues for Common-Mode Chokes to Mitigate Ground Currents in Inverter-Based Drive SystemsIEEE Transactions on Industry Applications, 2009
- Power Electronics and Motor Drives Recent Progress and PerspectiveIEEE Transactions on Industrial Electronics, 2008
- A Single-Stage PV Module Integrated Converter Based on a Low-Power Current-Source InverterIEEE Transactions on Industrial Electronics, 2008
- A Passive EMI Filter for Eliminating Both Bearing Current and Ground Leakage Current From an Inverter-Driven MotorIEEE Transactions on Power Electronics, 2006
- Transformer and Inductor Design Handbook2004
- Bearing currents and their relationship to PWM drivesIEEE Transactions on Power Electronics, 1997
- Modeling of motor bearing currents in PWM inverter drivesIEEE Transactions on Industry Applications, 1996