Numerical Optimization of Contraction and Expansion Structures in Laval Nozzles for Dehydration
Open Access
Abstract
A Laval nozzle is a pivotal component of supersonic separation technology for dehydration, but its performance is constrained by low separation efficiency due to intractable conflicts between droplet nucleation and growth rates. To address this issue, this work for the first time applied the Foelsch-MOC method to design an expansion section with a first-order differentiable and second-order continuous profile. A numerical model for pure water vapor condensation based on the ideal gas equation of state (EOS) was then established to optimize nozzle structures for droplet growth. Major findings revealed that the droplet radius of the Foelsch-MOC nozzle was 30.5% higher than that of the conical nozzle, while its outlet liquid mass fraction was 5.8% lower. The liquefaction capacity was found to increase first and then decrease with the expansion coefficient, peaking at 0.5. Moreover, increasing the axis shift from 9.3 mm to 25 mm promoted the outlet liquid mass fraction by 1.2% and decreased the droplet radius by 9.3%, thereby improving liquefaction capacity. These results highlight the droplet growth superiority of the novel expansion profile, providing a valuable guideline for designing nozzles that simultaneously ensure liquefaction efficiency and facilitate droplet development.Keywords
Funding Information
- National Natural Science Foundation of China (22108285)
- National Natural Science Foundation of China (U22A20425)
- Analytical Technology Development Project of Qingdao New Energy Shandong Laboratory (QIBEBT ATD 202401)
This publication has 40 references indexed in Scilit:
- Homogeneous condensation in high-speed flows: a review on droplet nucleation and growth modelsJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2025
- Intensifying CO2 condensation in the flue gas through the supersonic separators by hydrogen enriching: A computational studyChemical Engineering and Processing - Process Intensification, 2024
- NIMOC: A design and analysis tool for supersonic nozzles under non-ideal compressible flow conditionsJournal of Computational and Applied Mathematics, 2023
- Preliminary design and simulation of an innovative Rotary Supersonic Nozzles Expander apparatus for natural gas liquefaction and general refrigeration processesApplied Thermal Engineering, 2022
- Thermodynamics analysis of CO2 condensation in supersonic flows for the potential of clean offshore natural gas processingApplied Energy, 2022
- Experimental investigation and numerical analysis of separation performance for supersonic separator with novel drainage structure and reflux channelApplied Thermal Engineering, 2020
- Analysis for spiral vortex and effect of profile of nozzle and swirler on performance of supersonic separatorChemical Engineering and Processing - Process Intensification, 2020
- Supersonic separation technology for natural gas processing: A reviewChemical Engineering and Processing - Process Intensification, 2019
- Effect of linetype of convergent section on supersonic condensation characteristics of CH4-CO2 mixture gas in Laval nozzleChemical Engineering and Processing - Process Intensification, 2018
- Influence of swirl number on jet noise reduction using flat vane swirlersAerospace Science and Technology, 2018