Performance analysis of a new sustainable evaporative cooling pad made from coconut coir
Authors:
- 1 June 2008
- journal article
- research article
- Published by Taylor & Francis in International Journal of Sustainable Engineering
- Vol. 1 (2) , 117-131
Abstract
This paper reports a performance analysis for a new sustainable engineering application to beneficially reuse an abundant agricultural waste, coconut coir (Cocos nucifera), in evaporative cooling pads. Two small coconut coir pads of different configurations were fabricated and tested using a laboratory‐scale experimental arrangement. The air supply velocity was controlled and varied between 1.88 and 2.79 m s−1. Heat and mass transfer coefficients, evaporative cooling efficiency and pressure drop across the two types of coconut coir pad were analysed and compared with those of a commercial rigid media paper pad. Results show that the cooling efficiency of the manufactured coconut coir evaporative cooling pad was fairly good (about 50%) and close to that of the commercial paper pad (about 47%). The average pressure drop across the two coconut coir pads was 1.5 and 5.1 Pa respectively. Correlations for heat and mass transfer coefficients expressed using Nusselt and Sherwood numbers are also reported. In addition, the cooling potential of the coconut coir pads was analysed using the average climatic conditions of the central region in Thailand throughout the year. The analysis showed that the air temperature leaving the coconut coir pad varied from 23 to 28°C. Commercial development appears feasible given the coconut coir pad's good performance, lower cost and its availability throughout the country.Keywords
This publication has 6 references indexed in Scilit:
- Feasibility study of using agriculture waste as desiccant for air conditioning systemRenewable Energy, 2003
- Temperature Gradients in a Partially Shaded Large Greenhouse equipped with Evaporative Cooling PadsBiosystems Engineering, 2003
- Cooling Fan-ventilated Greenhouses: a Modelling StudyBiosystems Engineering, 2003
- Modeling and optimal design of evaporative cooling system in controlled environment greenhouseEnergy Conversion and Management, 2002
- Evaluation of the performance of local fibers in evaporative coolingEnergy Conversion and Management, 2002
- Evaporative Air Conditioning Handbook1986