Theoretical and Numerical Study on Stress Intensity Factors for FRP-Strengthened Steel Plates with Double-Edged Cracks
Open Access
Abstract
This paper presents a theoretical and numerical study on the stress intensity factors for double-edged cracked steel plates strengthened with fiber reinforced polymer (FRP) plates. Based on the stress intensity factor solution for infinite center-cracked steel plates strengthened with FRP plates, expressions of the stress intensity factors were proposed for double-edged cracked steel plates strengthened with FRP plates by introducing two correction factors: β and f. A finite element (FE) simulation was carried out to calculate the stress intensity factors of the steel plate specimens. Numerous combinations of the specimen width, crack length, FRP thickness and Young’s modulus, adhesive thickness, and shear modulus were considered to conduct the parametric investigation. The FE results were used to investigate the main influencing factors of the stress intensity factors and the correction factor, β. The expression of the correction factor, β, was formulated and calibrated based on the FE results. The proposed expressions of the stress intensity factors were a function of the applied stress, the crack length, the ratio between the crack length and the width of the steel plate, the stiffness ratio between the FRP plate and steel plate, the adhesive thickness, and the shear modulus. Finally, the theoretical results and numerical results were compared to validate the proposed expressions.Keywords
This publication has 40 references indexed in Scilit:
- Analytical solution for the bond strength of externally bonded reinforcementComposite Structures, 2012
- SIFs of CCT plate repaired with single‐sided composite patchFatigue & Fracture of Engineering Materials & Structures, 2011
- Boundary element analysis of CFRP reinforced steel platesComposite Structures, 2009
- Prediction of fatigue life for CFRP-strengthened steel platesThin-Walled Structures, 2009
- Experimental study on repair of fatigue cracks at welded web gusset joint using CFRP stripsThin-Walled Structures, 2009
- Modeling and validation of composite patch repair to cracked thick and thin metallic panelsComposites Part A: Applied Science and Manufacturing, 2009
- State-of-the-art review on FRP strengthened steel structuresEngineering Structures, 2007
- Successive 3D FE analysis technique for characterization of fatigue crack growth behavior in composite-repaired aluminum plateComposite Structures, 2004
- Fatigue Strength of Steel Girders Strengthened with Carbon Fiber Reinforced Polymer PatchJournal of Structural Engineering, 2003
- Stress intensity factors for cracked I-beamsEngineering Fracture Mechanics, 1997