Suitability of sawdust from three tropical timbers for wood-cement composites
- 4 January 2018
- journal article
- research article
- Published by Taylor & Francis in Journal of Sustainable Forestry
- Vol. 37 (4) , 414-428
Abstract
Construction material rising cost and global demand for economically-sustainable and environmentally-friendly building resources have necessitated the use of sawdust-cement composite. Wood constituents and cement incompatibility hinder its production and need careful selection of the timber. Sawdust suitability from Triplochiton scleroxylon, Entandrophragma cylindricum and Klainedoxa gabonensis for wood-cement composite was determined by identifying their chemical constituents and their composites’ physico-mechanical properties. T. scleroxylon recorded the minimum total extractive (6.12%), lignin (29.89%) and holocellulose (56.38%) and K. gabonensis the maximum (9.31, 31.59 and 57.5% respectively). Ash content was higher for T. scleroxylon (7.6%) but lower for K. gabonensis (1.53%). T. scleroxylon boards were stronger [Modulus of Elasticity (MOE) = 696.1 N/m2] and more moisture-resistant [Moisture Absorption (MA) = 8.8%] than E. cylindricum (MOE = 625.9 N/m2; MA = 9.5%). K. gabonensis boards crushed after manufacturing due to its incompatibility with cement. T. scleroxylon sawdust is suitable for wood-cement composites due to its more compatible chemical constituents (i.e., lower extractive, lignin, holocellulose contents and more ash) and its boards’ excellent physico-mechanical properties than those for the other timbers. Its sawdust-cement composites could be utilized for cladding and walling. The use of sawdust would increase green building resource base and reduce environmental pollution.Keywords
This publication has 20 references indexed in Scilit:
- Compatibilidad de cuatro maderas del este de Canadá con yeso y yeso-cemento por calorimetría isotérmicaMaderas. Ciencia y Tecnología, 2014
- Development of Wood-Crete building materials from sawdust and waste paperConstruction and Building Materials, 2013
- Uses of sawdust as admixture in production of lowcost and light-weight hollow sandcrete blocksAmerican Journal of Scientific and Industrial Research, 2012
- Cement-bonded composites made from tropical woods: Compatibility of wood and cementConstruction and Building Materials, 2012
- Dimensional Stability and Water Uptake Properties of Cement-Bonded Wood CompositesJournal of Polymers and the Environment, 2011
- Bio-based composites from waste agricultural residuesWaste Management, 2010
- Limestone dust and wood sawdust as brick materialBuilding and Environment, 2007
- Effects of fiber surface treatments on mechanical properties of wood fiber–cement compositesCement and Concrete Research, 2001
- Cement Hydration Tests Using Wood Flour may not Predict the Suitability of Acacia mangium and Eucalyptus pellita for the Manufacture of Wood-Wool Cement BoardsHolzforschung, 1999
- Effect of Panel Stiffness on Resistance of Cladding Panels to Blast LoadingJournal of Engineering Mechanics, 1998