Use of Iron Ore Fines in Cold-Bonded Self-Reducing Composite Pellets
- 4 September 2015
- journal article
- other
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 37 (1) , 42-48
Abstract
The feasibility of producing direct reduced iron from cold-bonded, self-reducing composite pellets, constituted from beneficiated iron ore slime, coke, and different binders (dextrin, bentonite, calcium lignosulfonate, and carboxymethyl-cellulose [CMC]) was studied. This was done using a design of experiments approach. It was found that as-received beneficiated iron ore slime is suitable as a raw material for the production of self-reducing composite pellets with carboxymethylcellulose as the most suitable binder. Dry strengths in excess of 300 N/pellet were attained by curing the pellets under ambient conditions. The composite pellets reduced within 20 min to degrees of metallization in excess of 90% at 1100°C, with decrepitation indices significantly below 5%. The degree of metallization of composite pellets increased with an increase in reduction temperature (from 1000 to 1100°C), reduction time (20 min. vs. 40 min), and coke quantity (15% vs. 20%). CMC was identified as the most economical and suitable binder for the Sishen concentrate.Keywords
Funding Information
- National Research Foundation of South Africa (TP2009072800103)
This publication has 17 references indexed in Scilit:
- Study of Organic and Inorganic Binders on Strength of Iron Oxide PelletsMetallurgical and Materials Transactions B, 2013
- Development of Cold Bonded Chromite Pellets for Ferrochrome Production in Submerged Arc FurnaceISIJ International, 2013
- Effects of Binder on the Properties of Iron Ore-Coal Composite PelletsMineral Processing and Extractive Metallurgy Review, 2010
- DIRECT REDUCTION OF MIXED MAGNETITE AND COAL PELLETS USING INDUCTION HEATINGMineral Processing and Extractive Metallurgy Review, 2004
- Characterization of Preparing Cold Bonded Pellets for Direct Reduction Using an Organic Binder.ISIJ International, 2003
- Rate-determining steps for reduction in magnetite-coal pelletsMinerals Engineering, 2002
- A Theoretical Investigation of Kinetics and Mechanisms of Iron Ore Reduction in an Ore/Coal Composite.ISIJ International, 1999
- A Preliminary Study of Influence of Atmosphere on Reduction Behavior of Iron Ore-Coal Composite Pellets.ISIJ International, 1999
- Study of nonisothermal reduction of iron ore-coal/char composite pelletMetallurgical and Materials Transactions B, 1994
- Studies on the reduction of hematite by carbonMetallurgical Transactions B, 1977