A 60 V Auto-Zero and Chopper Operational Amplifier With 800 kHz Interleaved Clocks and Input Bias Current Trimming
Author:
- 4 August 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 50 (12) , 2804-2813
Abstract
An auto-zero and chopper operational amplifier with a 4.5-60 V supply voltage range is realized, using a 0.18 μm CMOS process augmented by 5 V CMOS and 60 V DMOS transistors. It achieves a maximum offset voltage drift of 0.02 μV/ ° C, a minimum CMRR of 145 dB, a noise PSD of 6.8 nV/√Hz, and a 3.1 MHz unity gain bandwidth, while dissipating 840 μA of current. Up-modulated chopper ripple is suppressed by auto- zeroing. Furthermore, glitches from the charge injection of the input switches are mitigated by employing six parallel input stages with 800 kHz interleaved clocks. This moves the majority of the glitch energy up to 4.8 MHz, while leaving little energy at 800 kHz. As a result, the requirements on an external low-pass glitch filter is relaxed, and a wider usable signal bandwidth can be obtained. Maximum input bias current due to charge injection mismatch is reduced from 1.5 nA to 150 pA by post production trimming with an on-chip charge mismatch compensation circuit.Keywords
This publication has 9 references indexed in Scilit:
- A 21 nV/$\surd$Hz Chopper-Stabilized Multi-Path Current-Feedback Instrumentation Amplifier With 2 $\mu$V OffsetIEEE Journal of Solid-State Circuits, 2011
- Input characteristics of a chopped multi-path current feedback instrumentation amplifier2011
- A Micropower Chopper—CDS Operational AmplifierIEEE Journal of Solid-State Circuits, 2010
- A 140 dB-CMRR Current-Feedback Instrumentation Amplifier Employing Ping-Pong Auto-Zeroing and ChoppingIEEE Journal of Solid-State Circuits, 2010
- Auto Correction Feedback for Ripple Suppression in a Chopper AmplifierIEEE Journal of Solid-State Circuits, 2010
- A 36 V Programmable Instrumentation Amplifier With Sub-20 $\mu$V Offset and a CMRR in Excess of 120 dB at All Gain SettingsIEEE Journal of Solid-State Circuits, 2009
- A Micropower Chopper-Stabilized Operational Amplifier Using a SC Notch Filter With Synchronous Integration Inside the Continuous-Time Signal PathIEEE Journal of Solid-State Circuits, 2006
- A CMOS nested-chopper instrumentation amplifier with 100-nV offsetIEEE Journal of Solid-State Circuits, 2000
- Circuit techniques for reducing the effects of op-amp imperfections: autozeroing, correlated double sampling, and chopper stabilizationProceedings of the IEEE, 1996