New Insights into Pore Structure and Hydraulic Conductivity of Sodium Hydroxide Alkali-Activated Slag through Advanced Modelling
Open Access
Abstract
The study of alkali-activated slag (AAS) is motivated by the need for more sustainable alternatives to Portland cement (PC) within the construction industry. Specifically, AAS offers good mechanical and chemical properties. However, the influence of the activator on its pore structure and hydraulic conductivity remains unclear. Both pore structure and hydraulic conductivity are key parameters in understanding the drying process and could potentially explain the high drying shrinkage observed so far. The present study aims to investigate the pore size distribution and hydraulic conductivity of six distinct AAS/sodium hydroxide mortar compositions, with a particular emphasis on the effect of varying the activator’s molarity and the solution-to-binder ratio (s/b). This research uses the mass variation in different relative humidity (RH) conditions from experimental tests to model the pore surface area, the pore size distribution, and the hydraulic conductivity. From the results, it emerges that increasing the molarity from 0.5 to 8 M reduces the open porosity and refines the pore structure, while increasing the s/b from 0.5 to 0.8 increases the open porosity while refining the pore structure. In addition, high molarity compositions are not suitable for testing in high RH and natural carbonation conditions due to the occurrence of deliquescence. Moreover, the main drying mechanism in AAS is water vapour transport even at high relative humidity, contrary to what was observed in the literature for PC. Finally, the hydraulic conductivity of alkali-activated slag presents a minimum of around 85% RH against the 60–70% RH for PC, causing AAS to dry faster when the relative humidity decreases from 85 to 50%.Keywords
Funding Information
- Fonds De La Recherche Scientifique - FNRS (30439691)
This publication has 86 references indexed in Scilit:
- Influence of water-to-cement ratio and curing period on pore structure of cement mortarConstruction and Building Materials, 2013
- Potential application of geopolymers as protection coatings for marine concreteII. Microstructure and anticorrosion mechanismApplied Clay Science, 2010
- Reactivities of NaOH Enhanced Iron Blast Furnace Slag/Hydrated Lime Sorbents toward SO2 at Low Temperatures: Effects of the Presence of CO2, O2, and NOxIndustrial & Engineering Chemistry Research, 2009
- Drying and autogenous shrinkage of pastes and mortars with activated slag cementCement and Concrete Research, 2008
- Modélisation du séchage des bétonsRevue Européenne de Génie Civil, 2007
- Water vapour sorption experiments on hardened cementitious materialsCement and Concrete Research, 2007
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsSoil Science Society of America Journal, 1980
- The bet method of analysis of gas adsorption data and its relevance to the calculation of surface areasSurface Technology, 1976
- The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen IsothermsJournal of the American Chemical Society, 1951
- Adsorption of Gases in Multimolecular LayersJournal of the American Chemical Society, 1938