Development of an aeroelastic code based on three‐dimensional viscous–inviscid method for wind turbine computations
- 2 March 2017
- journal article
- Published by Wiley in Wind Energy
- Vol. 20 (7) , 1145-1170
Abstract
Aerodynamic and structural dynamic performance analysis of modern wind turbines are routinely estimated in the wind energy field using computational tools known as aeroelastic codes. Most aeroelastic codes use the blade element momentum (BEM) technique to model the rotor aerodynamics and a modal, multi‐body or the finite‐element approach to model the turbine structural dynamics. The present work describes the development of a novel aeroelastic code that combines a three‐dimensional viscous–inviscid interactive method, method for interactive rotor aerodynamic simulations (MIRAS), with the structural dynamics model used in the aeroelastic code FLEX5. The new code, called MIRAS‐FLEX, is an improvement on standard aeroelastic codes because it uses a more advanced aerodynamic model than BEM. With the new aeroelastic code, more physical aerodynamic predictions than BEM can be obtained as BEM uses empirical relations, such as tip loss corrections, to determine the flow around a rotor. Although more costly than BEM, a small cluster is sufficient to run MIRAS‐FLEX in a fast and easy way. MIRAS‐FLEX is compared against the widely used FLEX5 and FAST, as well as the participant codes from the Offshore Code Comparison Collaboration Project. Simulation tests consist of steady wind inflow conditions with different combinations of yaw error, wind shear, tower shadow and turbine‐elastic modeling. Turbulent inflow created by using a Mann box is also considered. MIRAS‐FLEX results, such as blade tip deflections and root‐bending moments, are generally in good agreement with the other codes. Copyright © 2017 John Wiley & Sons, Ltd.Keywords
Funding Information
- Strategiske Forskningsråd (Sagsnr. 0603-00506B)
This publication has 34 references indexed in Scilit:
- Development of an anisotropic beam finite element for composite wind turbine blades in multibody systemRenewable Energy, 2013
- Fluid–structure interaction modeling of wind turbines: simulating the full machineComputational Mechanics, 2012
- Aerodynamic noise analysis of large horizontal axis wind turbines considering fluid–structure interactionRenewable Energy, 2012
- 3D simulation of wind turbine rotors at full scale. Part II: Fluid–structure interaction modeling with composite bladesInternational Journal for Numerical Methods in Fluids, 2010
- 3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamicsInternational Journal for Numerical Methods in Fluids, 2010
- Fluid–structure interaction problems with strong added‐mass effectInternational Journal for Numerical Methods in Engineering, 2009
- Performance of a new partitioned procedure versus a monolithic procedure in fluid–structure interactionComputers & Structures, 2009
- A rigorous, engineer‐friendly approach for modelling realistic, composite rotor bladesWind Energy, 2006
- Provably second-order time-accurate loosely-coupled solution algorithms for transient nonlinear computational aeroelasticityComputer Methods in Applied Mechanics and Engineering, 2006
- Multirate linear multistep methodsBIT Numerical Mathematics, 1984