Study of the presence of spherical deformations on the Al top electrode due to electroforming in rewritable organic resistive memories
- 30 August 2017
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 19 (37) , 25691-25696
Abstract
Physical deformations are observed at the top electrodes during the electroforming process in Al/PEDOT:PSS + nitrogen doped multiwalled carbon nanotube (N-MWCNTs)/Al rewritable resistive memory devices. These physical deformations arise from electrochemical reactions, i.e., a reduction reaction in the native Al oxide layer, which are similar to those reported in TiO2-based resistive memory devices. These memory devices are electroformed at the ON state using an ∼−2 V pulse or at the OFF state using an ∼3 V pulse. These processes are current-controlled; a minimum compliance current is necessary to obtain the electroforming of the device, generally between 5 to 10 mA. SEM and AFM micrographs show the presence of spherical deformations at the top electrode due to O2 gas formation generated by the reduction in the native AlOx layer during the electroformation, with a diameter of ∼7 micrometres for positive voltage or a smaller diameter of ∼3 micrometres for negative voltage. After top-electrode delamination, circular craters are found in the active layer in the vicinity of the N-MWCNTs, which only occurs when a negative voltage is used in the electroformation, indicating that film damage is induced by oxygen bubbles created at the bottom electrode/polymeric film interface.Keywords
Funding Information
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación (CB-2015-01-256484)
This publication has 32 references indexed in Scilit:
- Polymer‐Based Resistive Memory Materials and DevicesAdvanced Materials, 2013
- Emerging memories: resistive switching mechanisms and current statusReports on Progress in Physics, 2012
- Investigation statistics of bipolar multilevel memristive mechanism and characterizations in a thin FeOx transition layer of TiN/SiO2/FeOx/Fe structureJournal of Applied Physics, 2011
- Organic Resistive Memory Devices: Performance Enhancement, Integration, and Advanced ArchitecturesAdvanced Functional Materials, 2011
- Reproducible resistance switching of a relatively thin FeOx layer produced by oxidizing the surface of a FePt electrode in a metal-oxide–metal structureThin Solid Films, 2010
- Improvement of resistance switching characteristics in a thin FeOx transition layer of TiN/SiO2/FeOx/FePt structure by rapid annealingApplied Physics Letters, 2010
- A study of resistive switching effects on a thin FeOx transition layer produced at the oxide/iron interface of TiN/SiO2/Fe-contented electrode structuresApplied Physics Letters, 2010
- Resistive switching in transition metal oxidesMaterials Today, 2008
- Reproducible switching effect in thin oxide films for memory applicationsApplied Physics Letters, 2000
- Low-Frequency Negative Resistance in Thin Anodic Oxide FilmsJournal of Applied Physics, 1962