Brazilian disk compression testing of plastic-bonded idoxuridine mock explosive
- 26 August 2021
- journal article
- research article
- Published by Taylor & Francis in Journal of Energetic Materials
- Vol. 41 (3) , 319-350
Abstract
Recently, there has been increased interest in developing new inert surrogate materials, or “mocks,” for plastic-bonded explosives (PBX). Idoxuridine (IDOX) has similar density and mechanical behavior to the explosive HMX, and formulated plastic-bonded IDOX showed promise for emulating the HMX-based PBX 9501 in preliminary mechanical experiments. Several improvements to the manufacture of plastic-bonded IDOX have been made and are characterized here by Brazilian Disk testing. Compression tests were performed on these disk specimens under quasi-static loading conditions and at three different temperatures, , , and . The full-field deformation over the sample surface during the compression was obtained using the optical digital image correlation (DIC) technique. In this article, we summarize the Brazilian disk compression test results of the 2020 batch of IDOX mock specimens. We present the overall response, as well as the local deformation measurement. We discuss in detail, the sequence of deformation events occurring in the disk specimen during the compression process. Elastic constants, including shear modulus, Young’s modulus, and Poisson’s ratio, of the IDOX mock material, are extracted from the Brazilian disk compression test data. Finally, we compare the Brazilian disk compression test results with the data obtained from the baseline PBX 9501, tested in 2007, as well as the data from a previous batch of IDOX mock material tested in 2017. We hope that such comparisons would point out the path of improvement for the formulation and pressing of the new IDOX mock.
Keywords
This publication has 15 references indexed in Scilit:
- Deformation and failure of a heterogeneous high explosivePhilosophical Magazine Letters, 2012
- A Lagrangian framework for analyzing microstructural level response of polymer-bonded explosivesModelling and Simulation in Materials Science and Engineering, 2011
- Elastic Constants Determination and Deformation Observation Using Brazilian Disk GeometryExperimental Mechanics, 2009
- Quasi–static studies of the deformation and failure of PBX 9501Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2002
- Quasi–static studies of the deformation and failure of β –HMX based polymer bonded explosivesProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2002
- A review of the Brazilian test for rock tensile strength determination. Part II: contact conditionsMining Science and Technology, 1991
- A review of the Brazilian test for rock tensile strength determination. Part I: calculation formulaMining Science and Technology, 1991
- The controlled failure of rock discs and rings loaded in diametral compressionInternational Journal of Rock Mechanics and Mining Sciences, 1972
- Measurement of tensile strength by diametral compression of discs and annuliEngineering Geology, 1971
- On the validity of the ‘Brazilian’ test for brittle materialsInternational Journal of Rock Mechanics and Mining Sciences, 1964