Residual Oil Distribution Pattern in a Fault-Solution Carbonate Reservoir and Countermeasures to Improve Oil Development Effectiveness
Open Access
- 15 April 2022
- journal article
- research article
- Published by Hindawi Limited in Geofluids
- Vol. 2022, 1-21
Abstract
Residual Oil Distribution Pattern in a Fault-Solution Carbonate Reservoir and Countermeasures to Improve Oil Development Effectiveness: Because of the strong random distribution of fractures and caves, fault-solution carbonate reservoirs exhibit significantly different flow mechanisms and development methods from conventional carbonate reservoirs. Natural elastic and edge-bottom water flooding are the main processes for developing fault-solution reservoirs. The rapid decline in production and the complex residual oil distribution are major challenges for oil production. This study is aimed at (1) assessing the residual oil migration law, (2) determining the residual oil distribution characteristics, and (3) identifying the main controlling factors using numerical simulation, to provide suggestions for enhancing oil recovery. The results showed that fractures are the main channel for oil flow and the main path of bottom water coning in the fault-solution reservoirs. The channeling of bottom water along high-angle fractures is the main reason for the decline in oil production. In addition, bottom water coning and gas/water injection are the key factors affecting the distribution of residual oil, while the irregular development of fractures and caves is the main factor causing diversified distribution patterns of the residual oil. The residual oil distribution patterns of fault-solution reservoirs include 4 types, namely, attic, bottom water rising and blocking, separated fracture-cavity, and pores near high-conductivity channel types. For tapping the potential of residual oil, several approaches can be used, namely, deploying new wells or using sidetracking of old wells in the loft and the separated fracture-cavity reservoirs. In addition, the attic residual oil type can also be developed using drainage oil recovery or gas injection for oil replacement. Liquid lift pump, water shutoff, and water cone restrain can also be used to tap residual oil from rising bottom water. Optimizing profile control and water shutoff measures and adjusting the injection and production relationship can be effective approaches for developing residual oil in the pores and cracks beside the high diversion channel.Keywords
Funding Information
- Science and Technology Department Project of Sinopec-China Petroleum (P11089, 2016ZX05053)
This publication has 24 references indexed in Scilit:
- Residual oil distribution characteristic of fractured-cavity carbonate reservoir after water flooding and enhanced oil recovery by N2 flooding of fractured-cavity carbonate reservoirJournal of Petroleum Science and Engineering, 2015
- Surfactant oil recovery in fractured carbonates: Experiments and modeling of different matrix dimensionsJournal of Petroleum Science and Engineering, 2015
- Effect of Non-equilibrium Gas Injection on the Performance of (Immiscible and Miscible) Gas–Oil Gravity Drainage in Naturally Fractured ReservoirsEnergy & Fuels, 2013
- Pore-Scale Distribution of Crude Oil Wettability in Carbonate RocksEnergy & Fuels, 2012
- Formation mechanism and distribution law of remaining oil in fracture-cavity reservoirPetroleum Exploration and Development, 2012
- GEOCHEMISTRY OF CRUDE OILS, SEEPAGE OILS AND SOURCE ROCKS FROM BELIZE AND GUATEMALA: INDICATIONS OF CARBONATE‐SOURCED PETROLEUM SYSTEMSJournal of Petroleum Geology, 2012
- Predicting Effective Permeability to Oil in Sandstone and Carbonate Reservoirs From Well-Logging DataSPE Reservoir Evaluation & Engineering, 2011
- Performance Evaluation of Cyclic Pressure Pulsing in a Depleted, Naturally Fractured Reservoir with Stripper-Well ProductionPetroleum Science and Technology, 2011
- Pore-throat sizes in sandstones, tight sandstones, and shalesAAPG Bulletin, 2009
- Influence of Viscous and Buoyancy Forces on the Mobilization of Residual Tetrachloroethylene during Surfactant FlushingEnvironmental Science & Technology, 1996