A Study on the Dynamic Evolution Mechanism of the Steady Magnetic Field on the Internal Flow Behavior of a Laser Melting Pool
Open Access
Abstract
A 2D model of laser melting consisting of heat transfer, hydrodynamic flow, surface tension, and a free surface motion was established. A physical field simulation of the laser melting process was performed, and the effect of steady magnetic field parameters on the internal flow and temperature fields of the melt pool was analyzed and validated by experiments. The results show that the steady magnetic field can suppress the melt pool flow rate, but slightly influences its temperature field, and with an increase in the magnetic field strength, the ripples on the melting surface decrease with increasing magnetic flux density. Compared with the molten pool depth experiment results, the simulation molten pool depth was 792 μm, representing a difference in value of 13.5%. The surface ripples of the molten pool fluctuated greatly in the absence of a magnetic field, while the surface ripples were suppressed when the magnetic flux density was 2T. This is consistent with the simulation results, thus effectively demonstrating the simulation model’s accuracy.Keywords
Funding Information
- the State Key Program of National Nature Science of China (52035014, 2023C01054)
- Key R&D Program of Zhejing (52035014, 2023C01054)
This publication has 28 references indexed in Scilit:
- Multiscale Modeling of Powder Bed–Based Additive ManufacturingAnnual Review of Materials Research, 2016
- Numerical Simulation of Electromagnetic flow, Temperature Field and Flow Field in Laser Molten Pool with Electromagnetic StirringChinese Journal of Lasers, 2015
- Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steelJournal of Materials Processing Technology, 2014
- Numerical Simulation of the Static Magnetic Field Regulation of the Laser Molten Pool Heat Transfer and Flow BehaviorApplied laser, 2014
- CHARACTERISTIC BEHAVIORS OF PARTICLE PHASES IN NiCrBSi-TiC COMPOSITE COATING BY LASER CLADDING ASSISTED BY MECHANICAL VIBRATIONACTA METALLURGICA SINICA, 2013
- Influence of Low-frequency Magnetic Fields During Laser Beam Welding of Aluminium with Filler WirePhysics Procedia, 2012
- Influence of alternative magnetic field on macro morphology and microstructure of laser cladding Fe-based composite coatingOptics and Precision Engineering, 2012
- Examination of Selective Pulsed Laser Micropolishing on Microfabricated Nickel Samples Using Spatial Frequency AnalysisJournal of Manufacturing Science and Engineering, 2009
- Heat transfer and fluid flow in laser microweldingJournal of Applied Physics, 2005
- SEM structure and properties of ASP2060 steel after laser meltingSurface and Coatings Technology, 2004