Study of the silane modification of magnesium hydroxide and their effects on the flame retardant and tensile properties of high density polyethylene nanocomposites
- 31 October 2013
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 35 (6) , 1060-1069
Abstract
The modification of magnesium hydroxide (MH) with triethoxy vinyl silane (TVS) was carried out via three different methods and the results are discussed with respect to their effect on the flame retardant and the tensile properties of high density polyethylene (HDPE) nanocomposites. Via a xylene suspension of MH and TVS, via a water suspension of MH and TVS, and via powder mixing of MH and TVS. It was found that in all three cases, SiOMg bonds formed on the MH particles surface. Also, this silane modification induced a certain level of particle agglomeration, but without modifying their morphology or particle size. It was also found that the flame retardant properties of the HDPE nanocomposites did not improve because of the use of silane modified MH. During the flame retardant tests, all nanocomposites passed the UL‐94‐HB, but it was observed that the flame permanence time was longer when using modified MH. The tensile properties were negatively affected by the addition of unmodified MH; the nanocomposites became hard and brittle, with reduced flexibility. This negative effect was diminished when using silane modified MH. POLYM. COMPOS., 35:1060–1069, 2014. © 2013 Society of Plastics EngineersKeywords
This publication has 14 references indexed in Scilit:
- PrefaceAdvanced Powder Technology, 2010
- Surface modification of magnesium hydroxide and its application in flame retardant polypropylene compositesJournal of Materials Science, 2009
- Flame retardancy effect of surface-modified metal hydroxides on linear low density polyethyleneJournal of Central South University of Technology, 2008
- Surface treatment of magnesium hydroxide to improve its dispersion in organic phase by the ultrasonic techniqueApplied Surface Science, 2007
- Structure and properties of polypropylene composites filled with magnesium hydroxideJournal of Applied Polymer Science, 2006
- Flammability characterization and synergistic effects of expandable graphite with magnesium hydroxide in halogen-free flame-retardant EVA blendsPolymer Degradation and Stability, 2003
- Combustion characteristics of halogen‐free flame‐retarded polyethylene containing magnesium hydroxide and some synergistsJournal of Applied Polymer Science, 2001
- Polyethylene compounds containing mineral fillers modified by acid coatings. 1: Characterization and processingPolymer Engineering & Science, 2000
- Charring of fire retarded ethylene vinyl acetate copolymer — magnesium hydroxide/zinc borate formulationsPolymer Degradation and Stability, 2000
- Preparation and characterization of low‐halogen and nonhalgoen fire‐resistant low‐smoke (FRLS) cable sheathing compound from blends of functionalized polyolefins and PVCJournal of Applied Polymer Science, 1991