Thermoformed products from high-density polyethylene and Softwood kraft pulp
Authors:
- 14 May 2024
- journal article
- research article
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 39 (3) , 339-348
Abstract
Plastic recycling, waste minimization such as process outfall valorization promotes a circular economy. Herein, food trays have been produced in the moulded pulp thermoforming process. To this end, high-density polyethylene (HDPE) outfall has been dispersed in water via Poly vinyl alcohol (PVA) addition in a Northern Bleached Softwood Kraft Pulp (NBSKP) slurry. Samples physical and mechanical properties have been evaluated. With an increasing HDPE content, parts air permeability was drastically reduced to a minimum of 2.4 ± 0.8 mL min−1. In addition, water and grease hold out properties have been increased with minimum water Cobb1800 value of 10.9 ± 5.4 gm−2 and oil Cobb1800 value of 13.18 ± 6.5 gm−2. Samples with high HDPE content demonstrated hydrophobic surface with water contact angle value above 90°. HDPE melting and binding to wood pulp fibers was monitored by SEM images. Regarding the mechanical properties, HDPE induced plastic deformation with a reduced Young modulus by 17 %. Moreover, the addition of HDPE increased wet strength by 81 %. However, the produced food tray composites with high HDPE content demonstrated low repulpability index.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (549865-20)
This publication has 33 references indexed in Scilit:
- Thermal reshaping as a route for reuse of end-of-life glass fibre-reinforced acrylic compositesComposites Part B: Engineering, 2023
- Moulded pulp products manufacturing with thermoformingPackaging Technology and Science, 2020
- Effect of treatment on water absorption behavior of natural fiber–reinforced polymer composites2019
- Optimizing the mechanical properties of papers reinforced with refining and layer-by-layer treated recycled fibers using response surface methodologyCarbohydrate Polymers, 2018
- The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy compositesComposites Part B: Engineering, 2015
- Perfluoroalkyl and polyfluoroalkyl substances in the environment: Terminology, classification, and originsIntegrated Environmental Assessment and Management, 2011
- Oxygen and oil barrier properties of microfibrillated cellulose films and coatingsCellulose, 2010
- Characterization of the barrier properties of composites of HDPE and purified cellulose fibersCellulose, 2007
- Novel cellulose fibre reinforced thermoplastic materialsCellulose, 2006
- Interfacial structures and mechanical properties of PVC composites reinforced by CaCO3 with different particle sizes and surface treatmentsPolymer International, 2005